帕克(IC) 与 ADI(Hybrid)以及普拉克(ANAMET)厌氧反应器 的比拟(国外英文资料).docVIP

帕克(IC) 与 ADI(Hybrid)以及普拉克(ANAMET)厌氧反应器 的比较(国外英文资料) (IC) and ADI (Hybrid) and (ANAMET) Comparison of anaerobic reactors A list, Characteristics of IC process, I do not introduced here, in the sales of the template and the English version of the For water in detail, emphatically introduce below ADI ANAMET technology of Hybrid and oprah winfrey grams. 1. The ADI (Hybrid) The reactor is similar to the UASB + AF. The lower layer of the reactor is UASB, a liquid sludge bed, which accounts for 40% of the total volume of the reactor, and the upper layer is the fixed membrane UFF, which accounts for 60% of the space (see photo). The Hybrid reactor can be activated by flocculated sludge or particle sludge. 80% of COD is removed from the lower UASB and 20% of the UFF is removed at the top. UFF packing for UPVC material, by numerous group 1 m * 0.5 m * 0.5 m packing module fold into 60 o baffle rising channel, provides a great microbes the growth of the adhesion of the surface of the carrier, is both an internal depth processing system. Is a highly efficient gas, liquid and solid three phase separator, at the same time also is equivalent to a large ramp clarification plant (chip), to maximize the sludge trapped inside the reactor. The water of the Hybrid is partially returned, which is mixed with the water through the circulation pump, which is used to buffer the change of the water pollution load and the buffer alkalinity. Water distribution system at the bottom of the distribution to the whole of wastewater to reactor, is equipped with a cleaning pipe at the same time, these pipes are connected to the bottom end of the feed water pipe and packing layer and the reactor lid, through its available high pressure water washing to remove obstruction in the water distribution system. To prevent water excessively high SS UFF filler plug, in pulping and papermaking wastewater treatment, waste water after preliminary to remove SS inclined screen on the inlet pipe of Hybrid also add fi