多管及布袋式除尘器运转保护说明(国外英文资料).docVIP

多管及布袋式除尘器运行维护说明(国外英文资料) If there is a drop leakage for resealing. Fan motor - for every one month, check the fixed bolts of the fan motor. Electric control box - always keep the control cabinet clean and prevent dust from entering. 4.12 the daily operation of the dust collector When the dust collector runs, it is strictly forbidden to open the door. In the case of dust and gas, it is not allowed to operate under water shortage. No water is allowed to run. When high water and low water levels are present, check electrode rods. General failures and handling methods: The fault why To deal with Air volume is small The fan connection is reversed. The door of repair is closed The water is too high. The dust removal system has great resistance Rewiring. Close inspection door Adjust electrode rods. Clean the unit and air duct The purification effect is poor The water level is low. The working water in the dust collector is high in dust. The door of repair is closed The dust removal system has great resistance and the air volume decreases Adjust electrode rods. Increase the number of sewage. Close inspection door. Clean the unit and air duct Water filling large 1, the sealing device leaks. 2, the electric pusher is not tight. 3, the solenoid valve fails Tighten the sealing device or replace the sealing part in the sealing device. Remove the lower and lower limit of the lever. Repair solenoid valve A list of spare parts for a multi-tube impact filter The serial number Of the goods specifications note one Water filter ( 2 Solenoid valve ( 380 v 3 Water level gauge TJ - 1 4 Push lever limit switch LM - 18 to 22 ds 5 Push rod discharge core TJDCC - PW 6 Electric putter TJ - T1 7 nozzle PVC 8 The motor Y132S2-2 7.5 KW Type 7 9 The motor 15 kw Y160M2-2 11, 14 type with 10 fan 4-72-4.5 - A Type 7 11 fan 4-72-5 a 11 type with 12 fan 4-79-5 a 14 type with 13 Water level gauge TJ - 2 380 v Shenhua shenhua power generation co., LTD ? The flat bag dust collector runs the maintenance in