不合品牌笔记本电脑切换到投影仪的方法(国外英文资料).docVIP

不同品牌笔记本电脑切换到投影仪的方法(国外英文资料) Different brand laptops switch to the projector method , · elegance · 0 a fan , 1 / f, There are three modes of output: 1, LCD screen output, VGA port without output. This is the default way to think about saving power. VGA port output, no output on the screen. VGA ports and screens have output. So, the laptop switches to the projector, and the computer has to switch to the third output mode. Take the zhaoyang notebook computer for example, switch mode to the keyboard Fn ten. Older notebooks, such as Toshiba, switch to a hard switch on the side of the laptop. Find the brand according to the brand? Key: Fn + F * FN + F5 or + F10 if you cant do that FN + other FX try. When you dont know, you will press f1 to f12 every three times, because the notebook of three transformations? Projector? ? The notebook projector also has the key on the FN + with the horizontal bar. Each manufacturer of notebooks are controlled by the respective BIOS to realize Fn + corresponding function keys the function of the switching mode, but the BIOS compared with desktop, laptop brands independent optimization and custom situation a lot, and also there are few notebook manufacturers association in the included software (CD) attached in addition to hardware control display switch outside of the software functions, therefore, it is difficult to use in addition to other ways to control the notebook to switch to the projector. If the Fn buttons on a laptop keyboard are accidentally damaged, there is probably no other option than using a third-party keyboard simulator. General procedure for a laptop connection projector: Turn off the computer, pick up the projector, then open the computer and let the computer test it. After you enter XP, you can switch from Fn + F8. The projector is often caused by a mismatch between the resolution of the LCD and the resolution of the projector. Change the resolution of the computer and refresh the frequency. Turn off the computer and ch