SRX关于VR两种类型测试报告.docx

Forwding 类型的路由实例只有转发表，没有路由表 set routing-options static route /0 next-hop set routing-options rib-groups GROUP import-rib inet.0 set routing-options rib-groups GROUP import-rib Forwarding.inet.0 set routing-instances Forwarding instance-type forwarding set routing-instances Forwarding routing-options static route /0 next-hop 1、路由表 2、转发表 默认default转发表 set routing-options interface-routes rib-group inet GROUP //但是把接口加入到了rib-group 后的路由表和转发表 1、路由表 2、forwarding类型转发表 对比VR类型的转发表 从上面两个类型的转发表来看，virtual-router类型的路由实例转发表有网关的IP对应的MAC地址和出接口 Forwarding类型的路由实例，转发表里面没有网关IP以及对应的MAC 完整配置：root# show |display set set version 12.1X44-D40.2 set system root-authentication encrypted-password $1$fscQ/Oxy$.ZbabEomcGHNaUoE6T5SY1 set system services telnet set system services web-management http interface all set interfaces fe-0/0/0 unit 0 family inet address /24 set interfaces fe-0/0/1 unit 0 family inet filter input PBR set interfaces fe-0/0/1 unit 0 family inet address /24 set interfaces fe-0/0/3 unit 0 family ethernet-switching vlan members vlan10 set interfaces vlan unit 10 family inet address /24 set routing-options interface-routes rib-group inet GROUP set routing-options static route /0 next-hop set routing-options rib-groups GROUP import-rib inet.0 set routing-options rib-groups GROUP import-rib Forwarding.inet.0 set security flow traceoptions file ping set security flow traceoptions file files 2 set security flow traceoptions flag basic-datapath set security flow traceoptions flag packet-drops set security flow traceoptions packet-filter 1 destination-prefix 00/32 set security nat destination pool Server_100 address 00/32 set security nat destination rule-set Test1 from zone CU set security nat destination rule-set Test1 rule Test_CU match destination-address 00/32 set security nat destination rule-set Test1 rule Test_CU then destination-nat pool Server_100 set security nat destination rule-set Test2 from zone CT set security nat destination rule-set Test2 rule Test_CT match dest