AATCC 106-2009 纺织品 色牢度试验 耐海水色牢度Colorfastness to Water：Sea.pdfVIP

fiATCC Test Method 106-2009 Colorfastness to Water: Sea Developed in 1962 by AATCC Commit 4.3 Manufacturers safety recommen 12.4). tee RA23; revised 1967, 1968, 1972, dations should be followed when operat 8.2 Remove the test specimen from the 1981, 2009; reaflirmed 1975, 1978, ing laboratory testing equipment. test solution aud only pass between 1989, 2007; editorially revised 1985, 4.4 Observe padder safety. Ensure ade squeeze rolls ( winger) to remove excess 1994, 2001, 2005, 2008; editorially re quate guard at the nip point. Normal safe liquor when the wet weight of the test vised and reallirmed 1986, 1991, 1997, guards on pad should not be removed. specimen is more than 3 times its dry 2002. Partly equivalent to IS0 105-E02. weight. \Vhenevcr possible, the wet weight should be 2.5-3.0 times the dry 5. Apparatus and Materials (see 12.1) weight. 1. Purpose and Scope 5.1 Perspiration tester (plastic or glass 8.3 Place the test specimen between plates are available with the equipment) glass or plastic plates and insert in the 1.1 This test method is designed to (see 12.2). specimen unit of the perspiration tester. measure the resistance to sea water of 5.2 Drying o