直营店浅析营销模式的探索.doc

忻州四方铁路器材有限公司 防水系列产品营销模式发展探索 一、产品营销模式提出背景 中央关于“国民经济和社会发展构建扩大内需长效机制，进一步释放城乡居民消费潜力，逐步使我国国内市场总体规模位居世界前列。发挥科技创新对产业结构优化升级的驱动作用，加快国家创新体系建设，强化企业在技术创新中的主体地位，引导资金、人才、技术等创新资源向企业聚集，推进产学研战略联盟，提升产业核心竞争力，推动三次产业在更高水平上协同发展把资源节约和环境保护贯穿于生产、流通、消费、建设各领域各环节，提升可持续发展能力。完善公共财政制度，提高政府保障能力，建立健全符合国情、比较完整、覆盖城乡、可持续的基本公共服务体系，逐步缩小城乡区域间人民生活水平和公共服务差距。高举中国特色社会主义伟大旗帜，以邓小平理论和三个代表重要思想为指导，深入贯彻落实科学发展观，适应国内外形势新变化，顺应各族人民过上更好生活新期待，以科学发展为主题，巩固和扩大应对国际金融危机冲击成果，促进经济长期平稳较快发展和社会和谐稳定，为全面建成小康社会打下具有决定性意义的基础。 or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test and performance test copies of the record. If necessary, review should be