ProductweightSOP.docVIP

Engineering ProjectSpecification No.: Citi-0004Release Date: 2011-2-14Product weight measure SOP Page  PAGE \* MERGEFORMAT 3 Document Issuer:Document Released by:Latest update: Jacob HuangSeele Wu2011-1-20Product weight measure SOPTable of Contents  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc279500903 1 Scope  PAGEREF _Toc279500903 \h 2  HYPERLINK \l _Toc279500904 2 Purpose  PAGEREF _Toc279500904 \h 2  HYPERLINK \l _Toc279500907 3 Product weight measure requirement  PAGEREF _Toc279500907 \h 2  HYPERLINK \l _Toc279500915 4 Reference  PAGEREF _Toc279500915 \h 3  HYPERLINK \l _Toc279500916 5 Revisions  PAGEREF _Toc279500916 \h 3  Scope IS: A process for people to weight the product and make sure product weight measure method is correct A guideline for people to check product weight on the production Purpose To make Ashley products weight more accurate with the production Have a clear procedure for Citigroup/supplier/manufacturer using when they measure the product weight Product weight measure requirement Before weighing the product each time, the scale needed to be adjusted to make sure it is accurate. One easy way to check the scale is to place 24 cans of regular coke (330ml) on the scale. If the total actual weight is ±2% of the standard weight (8.712Kg - 9.068Kg), then begin to weigh the product An Ashley QC must be present at the time of weighing the product At least three of each sku need to be weighed and the average used as the actual weight. If there is more than ± 2% between any of the three pieces being weighed, the units should be checked to determine why there is such a large variance. An e-mail stating the accurate weight of the product must be reported from a Citigroup employee’s email address (not factory e-mail) When product changes (ECO), the product needs to be re-weighed and the system updated if the change will affect the product weight. Any wei