Honeywell (Modules+Specification).pdfVIP

Honeywell Process Solutions, 512 Virginia Drive, Fort Washington, PA 19034 Printed in U.S.A. ? Copyright 2007 — Honeywell HC900 Hybrid Controller Modules 51-52-03-41 2/8/08 Page 1 of 36 Specification Overview The Honeywell HC900 Hybrid Controller is an advanced loop and logic controller offering a modular design sized to satisfy the control and data acquisition needs of a wide range of process equipment. I/O Modules The following I/O modules are available to create a custom control solution. ? 8 point universal analog input modules: Inputs may be mixed on a module and may include multiple thermocouple types, RTDs, ohms, voltage or millivoltage types – all easily assigned using the Hybrid Control Designer configuration tool. High point-to-point isolation simplifies installation and saves the expense of external isolation hardware. (p. 5) ? 16 point high level analog input module: each point is configurable for V or mA. Point-to-point isolation. (p. 9) ? 4 point isolated analog output module. Supports from 0 to 20mA each. (p. 12) ? 8 point analog output, isolated in 2 groups of 4 points. Supports from 0 to 20mA each (p 13) ? 16 point analog output, isolated in 4 groups of 4 points. Supports from 0 to 20mA each (p 14) ? 16 point digital input modules: Contact closure type, DC voltage and AC voltage types. (p. 15) ? 32 point digital input module: DC voltage. (p. 18) ? 8 point AC or 16 point DC digital output modules (sinking type). (p. 19) ? 32 point digital output: DC voltage (sourcing type) (p. 21) ? 8 point relay output module: four form C type and four form A type relays. (p. 22) ? 4 channel Pulse/Frequency/Quadrature I/O module (p. 23) Insert removal of I/O under power For ease of maintenance, the HC900 controller supports removing and inserting I/O modules from the module rack without removing power from the controller. Each module is sensed for validity by the controller and auto- configured