BTA204X_800E.pdfVIP

1. Product profile 1.1 General description Passivated guaranteed commutation triacs in a plastic full pack package. These devices balance the requirements of commutation performance and gate sensitivity. The ‘sensitive gate’ E series and ‘logic level’ D series are intended for interfacing with low power drivers, including microcontrollers. 1.2 Features 1.3 Applications 1.4 Quick reference data 2. Pinning information BTA204X series D, E and F Three quadrant triacs guaranteed commutation Rev. 04 — 17 March 2005 Product data sheet ■ Suitable for interfacing with low power drivers, including microcontrollers ■ Isolated mounting base ■ Motor control ■ High inductive loads ■ VDRM ≤ 600 V (BTA204X-600D) ■ IT(RMS) ≤ 4 A■ VDRM ≤ 600 V (BTA204X-600E) ■ IGT ≤ 5 mA (BTA204X-600D)■ VDRM ≤ 600 V (BTA204X-600F) ■ IGT ≤ 10 mA (BTA204X-600E)■ VDRM ≤ 800 V (BTA204X-800E) ■ IGT ≤ 25 mA (BTA204X-600F) Table 1: Pinning Pin Description Simplified outline Symbol 1 main terminal 1 (T1) SOT186A (TO-220F) 2 main terminal 2 (T2) 3 gate (G) mb mounting base (isolated) 321 sym051 T1 G T2 Philips Semiconductors BTA204X series D, E and F Three quadrant triacs guaranteed commutation3. Ordering information 4. Limiting values [1] Although not recommended, off-state voltages up to 800 V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 6 A/μs. Table 2: Ordering information Type number Package Name Description Version BTA204X-600D TO-220F plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 3 lead TO-220 ‘full pack’ SOT186A BTA204X-600E BTA204X-600F BTA204X-800E Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VDRM repetitive peak off-state voltage BTA204X-600D [1] - 600 V BTA204X-600E [1] - 600 V BTA204X-600F [1] - 600 V BTA204X-800E - 800 V IT(RMS) RMS on-state current full sine wave; Ths ≤ 92 °C; Figure 4 and Figure 5 - 4 A ITS