TS16949英文版.pdfVIP

GM Customer Specifics - ISO/TS 16949 December 2003 General Motors Customer Specific Requirements - ISO/TS16949 1. Scope ISO/TS 16949:2002, Second Edition, March 1, 2002, “Quality management systems – Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations,” and this document define General Motors fundamental quality system requirements for organizations where automotive customer-specified parts, for production and/or service are manufactured. To satisfy supplier quality system requirements, General Motors will accept, as optional to QS-9000, a third party certification to ISO/TS 16949 that meets the following conditions: ? The certification scope must include both ISO/TS 16949 and the accompanying ISO/TS 16949 GM-Customer Specific Requirements, ? The certification must be conducted in compliance with the IATF recognized automotive certification scheme by a certification body contracted and recognized by an IATF Oversight office. NOTE: The Quality System Requirements, QS-9000, 3rd Edition (QS-9000:1998), expires on December 14, 2006. All ISO/TS 16949:2002 requirements and the requirements of this document shall be addressed in the organization’s quality management system. 2. References 2.1 DaimlerChrysler, Ford Motor, General Motors Quality System Requirements (QS- 9000), Third Edition, March, 1998. 2.2 DaimlerChrysler, Ford Motor, General Motors Production Part Approval Process PPAP), Third Edition, September, 1999. 2.3 DaimlerChrysler, Ford Motor, General Motors Statistical Process Control (SPC), First Edition, 1992. 2.4 DaimlerChrysler, Ford Motor, General Motors Advanced Product Quality Planning and Control Plan, June, 1994. 2.5 DaimlerChrysler, Ford Motor, General Motors Measurement Systems Analysis, MSA Third Edition, March, 2002. 2.6 DaimlerChrysler, Ford Motor, General Motors Potential Failure Mode and Effects Analysis, FMEA Third Edit