ubiflex 产品说明.pdfVIP

June 2009 CI/SfB (57.5) b u i l d i n g s o l u t i o n s Ubiflex non-lead flashing system : for all traditional lead applications02 Contents Page Introduction 02 Applications 02 The Ubiflex System 03 Design guidance ? General 04 ? Fixing Ubiflex into a wall or chimney 05 ? Flashing to a flat roof upstand 05 ? Flashing to a wall or chimney side abutment - double lap tiles/slates 06 side abutment - single lap tiles 07 top abutment - over tiles 08 top abutment - over patent glazing 08 ? Flashing to vertical tile and slate hanging 09 ? Pitched valley lining 10 ? Flashing to rooflights/northlights 10 ? Flashings to canopies, hoods and carports 11 Supply, handling and storage 11 Installation 11 Maintenance and repair 11 Ubiflex is a non-lead waterproof flashing material which can be used in all applications where lead is traditionally used to provide a weatherproof junction at features such as changes of direction and materials. Ubiflex can also be used to form damp proof courses and cavity trays in masonry walls. Ubiflex is manufactured by coating both sides of an aluminium mesh reinforcement with a mixture of modified bitumen and additives. The underside of the product is finished with a kraft paper and film backing. Colour granules are added to the surface, the material cooled and rolled into the required lengths. Ubiflex non-lead flashing Applications Ubiflex Ubiflex B2 B3 Soakers Sharp corners Valley gutters Cover flashings Window flashings Door flashings Step flashings Rooflight flashings Conservatory flashings DPC cavity tray in masonry walls BBA Certificate Ubiflex is now available in two types: ? Ubiflex B2 ? Ubiflex B3 Original Ubiflex has become Ubiflex B3 and a new, lighter version - Ubiflex B2 - has been introduced to the range. The application selector opposite shows where Ubiflex B2 and Ubiflex B3 can be used in specific applications. The Ubiflex System - setting new standards in flashings Ubiflex non-lead flashing system : for all traditional lead app