FCW系统有效性测试标准_FCW_NCAP_Test_Procedure_2-7-2013.pdfVIP

1 FORWARD COLLISION WARNING SYSTEM CONFIRMATION TEST February 2013 Office of Vehicle Safety Office of Crash Avoidance Standards National Highway Traffic Safety Administration Room W43-478, NVS-120 1200 New Jersey Avenue, SE Washington, DC 20590 2 FORWARD COLLISION WARNING SYSTEM CONFIRMATION TEST TABLE OF CONTENTS 1.0 PURPOSE AND APPLICATION 3 2.0 GENERAL REQUIREMENTS 3 3.0 SECURITY 3 4.0 GOOD HOUSEKEEPING 4 5.0 TEST SCHEDULING AND MONITORING 4 6.0 TEST DATA DISPOSITION 5 7.0 VEHICLES AND EQUIPMENT (GFP) 7 8.0 INSTRUMENTATION AND CALIBRATION.…………………………………………6 9.0 PHOTOGRAPHIC DOCUMENTATION 11 10.0 DEFINITIONS 13 11.0 PRETEST AND FACILITY REQUIREMENTS 14 12.0 TEST EXECUTION AND TEST REQUIREMENTS 19 13.0 POST TEST REQUIREMENTS 25 14.0 REPORTS 25 15.0 DATA SHEETS 33 16.0 REFERENCES 37 17.0 EQUATIONS FOR CALCULATING TTC VALUES 38 3 1.0 PURPOSE AND APPLICATION This laboratory test procedure provides specifications for conducting tests to confirm the existence of a Forward Collision Warning (FCW) system on a passenger vehicle with a gross vehicle weight rating (GVWR) of under 10,000 pounds. Current FCW technology is dependent on radar-based and/or vision based sensors capable of detecting traffic. Although it is impossible to predict what technologies could be used in future FCW systems, it is believed that with minor modifications to the test setup, other technologies may be evaluated. The requirements of this indicant test procedure must be strictly adhered to. The Contractors in-house test procedure must have NHTSA approval prior to conducting the first test of a particular fiscal year program. The Contractors test procedure cannot deviate in any way from the NHTSA procedure without the prior approval of the NHTSA COTR. 2.0 GENERAL REQUIREMENTS This test evaluates the ability of a forward collision warning system to detect and