緊固件中英文对照-CYX.docVIP

紧固件中英文对照 螺纹大径：Major Diam 螺纹 中径：Pitch diam 螺纹 底径：Minor diam 通止规：Go/No go gage 机械性能：mechanical and physical properties unified thread 统一英制螺纹 Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆 Case carburization 表面渗碳 With across flats 对边 With across corners 对角 Radius of fillet:头下圆角 Transition thread length 过度螺纹 Wrenching height 扳拧高度 Rockwell 铬氏硬度 Vickers 维氏硬度 Brinell 布氏硬度 Metallography microscope 金相显微镜 Salt spray device 盐雾试验箱 Tensile testing machine 拉力试验机 Cold forming 冷打 Hot forging 红镦 P C 8 = property class 8 机械性能8级 原材料：Raw material 球化退火：Annealing 冷拔：Drawing 冷镦：Forming 机加工：Machining 螺纹成型：Roll Threading 热处理：heat-treatment 表面处理：finish 去氢：Lustrating hydrogen 检验：Inspection 包装：Packing 入库：Stocking 车床：lathe 磨制：grinding 红打：hot forging 冲压：punching Diameter 直径 Length 长度 1 标准 GB （国标）ISO(国际标准) DIN （德制） JIS （日标） ANSI /ASME （美标） BA （英制） 2 螺纹 M. MF (公制牙) UNC.UNF (美制牙) BSW.BSF (英制牙) 3 海关编码螺栓螺帽垫圈 BO=black oxide 氧化发黑 IHH=ind hex head 锯 六角头 PH=phillips 十字槽 sw/fw=split washer/flatwasher 弹垫 平垫 kep nut 锁紧螺母 cementation 渗碳 acorn nut 盖形螺母螺纹大径：Major?Diam螺纹?中径：Pitch?diam螺纹?底径：Minor?diam通止规：Go/No?go?gage机械性能：mechanical?and?physical?propertiesunified?thread?统一英制螺纹Lustrate?hydrogen?after?galvanizing?to?avoid?hydrogen?embrittlement?镀后去氢，防止氢脆Case?carburization?表面渗碳With?across?flats?对边With?across?corners?对角Radius?of?fillet:头下圆角Transition?thread?length?过度螺纹Wrenching?height?扳拧高度Rockwell?铬氏硬度Vickers?维氏硬度Brinell?布氏硬度Metallography?microscope?金相显微镜Salt?spray?device?盐雾试验箱Tensile?testing?machine?拉力试验机Cold?forming?冷打Hot?forging?红镦P?C?8?=?property?class?8?机械性能8级原材料：Raw?material?球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll?Threading热处理：heat-treatment表面处理：finish去氢：Lustrating?hydrogenNuts?Formers沉头内六角螺栓六角螺栓，Headers?螺丝、螺帽热处理?Bolt?Nut?And?Screws?Heat?Treatment?螺丝、螺帽热处理炉?Bolt?Nut?And?Screws?Heat?Treatment?Furnaces?球状化电器炖炉?Carburizing?Furnace?Vacuum?And?Bell?Type?Furnace?超防锈复合瓷膜?Ceramic?Coating?连续式光辉渗碳淬火炉?Continu