AP控制常用命令..docVIP

1、设置无线客户端离线后的解绑时间，系统默认为1个小时，可以设置的范围60s到86400s，即1分钟到1天： [jiujiang-AC4]wlan ap da_ptxx_ap02 [jiujiang-AC4-wlan-ap-da_ptxx_ap02] [jiujiang-AC4-wlan-ap-da_ptxx_ap02]client idle-timeout ? INTEGER60-86400 Specify idle time in seconds (Default: 3600) //时间在60S到86400S之间 [jiujiang-AC4-wlan-ap-da_ptxx_ap02]client idle-timeout 3600 2、设置AP的channel，可以手工指定信道，也可以设置为auto： [jiujiang-AC4]wlan ap da_ptxx_ap02 [jiujiang-AC4-wlan-ap-da_ptxx_ap02]radio 1 [jiujiang-AC4-wlan-ap-da_ptxx_ap02-radio-1] [jiujiang-AC4-wlan-ap-da_ptxx_ap02-radio-1]channel ? INTEGER Legal channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 auto Automatic channel selection (Default) band-width Specify the BandWidth Mode lock Lock the current channel [jiujiang-AC4-wlan-ap-da_ptxx_ap02-radio-1]channel 6 //手工指定为6 [jiujiang-AC4-wlan-ap-da_ptxx_ap02-radio-1]channel auto //或是自动 3、设置AP射频口能够同时接受的无线客户端数，默认为64： [jiujiang-AC4]wlan service-template 1 //进入AP所绑定的服务模版模式中 [jiujiang-AC4-wlan-st-1] [jiujiang-AC4-wlan-st-1]client ? forwarding-mode Forwarding-mode max-count Specify maximum client number per BSS [jiujiang-AC4-wlan-st-1]client ma [jiujiang-AC4-wlan-st-1]client max-count ? INTEGER1-124 Maximum client number per BSS (Default: 64) //最大客户端数位124，默认为64 [jiujiang-AC4-wlan-st-1]client max-count 64 //设置最大客户端数为64 Error: Service template in use. Disable it to change parameters. //当需要改变最大客户端数时，需要关闭模块 关闭模版的方法： [jiujiang-AC4]wlan service-template 1 //首先进入服务模版1 [jiujiang-AC4-wlan-st-1]service-template disable //关闭服务模版，注意，当关闭服务模版时，所有启用了该模版的AP将停止接入用户，慎用 4、查看AC上用户在线情况： [jiujiang-AC4]dis wlan client Total Number of Clients : 624 Client Information SSID: ChinaNet -------------------------------------------------------------------------------- MAC Address User Name APID/RID IP Address VLAN -----------------