如何在真机上调Android应用程序.docVIP

1、首先将手机设置为调试模式 方法：设置——应用程序——开发——USB调试，打上√即可 用数据线连接至电脑，在电脑上安装豌豆荚，此时豌豆荚会帮你安装驱动，安装好后豌豆荚就可以连接上手机了 3、用adb命令测试是否有装置已连接 命令：adb devices 看到已经有一个装置了，即为我们连接的真机 注意：有的人可能提示找不到这个adb命令，这是因为你没有将其加入到path环境变量中，或者你进入sdk下的tools目录在运行此命令就不会报错，或者将tools路径加入到环境变量中，当然推荐第二种方法了 有的时候可能会出现下面的错误： adb?server?is?out?of?date.??killing...?? ADB?server?didnt?ACK? *?failed?to?start?daemon?* 究其源就是adb server没启动 到stackoverflow上查了一下 经过分析整理如下： 原来adb server 端口绑定失败 在eclipse中选择Run——Run Configurations，在左边选择好你要调试的工程，然后将右边切换至Target标签下 这有三个选项，如果你想连接至真机调试，可选第一个或第二个，这里我直接选择第一个，点击Run，等待几秒钟出现以下界面 在这里就看到了我们的真机装置了，选择上面的真机OK即可在真机上运行程序了 North Gate Station and all the long distance Intercity, TRANS-province lines; North Gate Station currently runs the original counties, rural routes; Simon, station main, Yibin city, across the city, across the province and to the West of range line. Yibin city highway main station distribution table 3.1-6 station name grade accounted for to area m2 Gao North Gate Station and all the long distance Intercity, TRANS-province lines; North Gate Station currently runs the original counties, rural routes; Simon, station main, Yibin city, across the city, across the province and to the West of range line. Yibin city highway main station distribution table 3.1-6 station name grade accounted for to area m2 Gao North Gate Station and all the long distance Intercity, TRANS-province lines; North Gate Station currently runs the original counties, rural routes; Simon, station main, Yibin city, across the city, across the province and to the West of range line. Yibin city highway main station distribution table 3.1-6 station name grade accounted for to area m2 Gao