如何用RSNEWORS定义在RSLOGIX5000中地址.docVIP

在RSWORK中,对于每一个器件在ONLINE情况下都应该打开PROFIETY一下,这样会自动读取当前的器件信息,这样就使得如果错误的EDS FILES得到更正.使我们得到正确的器件信息. RSLOGIX5000中的器件映射地址是由RSNETWORKS中对器件地址的分配决定的. 同时还可以通过改变在RSNETWORKS中对器件的地址分配来改变在RSLOGIX5000中的地址分配. 比如在输入栏将03 POWERMONITOR3000 对于 DATA3 开始变化到DATA4. 将AUTOMAP ON ADD去勾,不选. 在输入栏中点亮POWERMONITOR, 点击ADVANCE. 将DWORD该为4. 再点击APPLY MAPPING, 在看一下输入栏,回发现POWERMONITOR地址变了. B.,将SMC FLEX的输入地址改变成一半.不是原来0—31,而是0—8. 1.同样在输入栏点亮SMC FLEX,并点击ADVANCE. 把BIT LENGTH 从32变成16. 再点击APPLY MAPPING, 会看到如下. 这样通过改变RSNETWORKS的地址分布,才能相关地改变连接的RSLOGIX5000的地址分布. 在TAG分配表中, LOCAL 1:O 和 LOCAL 1:I 表示SDN卡所连接的DEVICENET网的各个部分的输入输出地址.而此地址中的个地址由在RSNETWORKS中1756 SDN卡中定义的相关地址决定. 而具体每个地址的定义由相关的器件手册中来定义的,比如SMC FLEX,在它的参考手册中我们会发现有16状态位和16命令位的定义,其实就是RSLOGIX5000中SMC FLEX的输入和输出的地址定义. enforced thermal insulation starts checking system, issued by the thermal insulation construction before you start to notice, transfer inspection of upper and lower operation and transfer of records. For outdoor operation, pipeline equipment to effectively carry out the insulation waterproof measures fail to install protective panels in part with three tarpaulin cover, to prevent insulation from moisture. Insulation seam Michael Jackson 5mm, joints, joints 100mm, insulation thickness tolerance +10MM~ – 5mm , appropriate material elastic banding, spacing according to the design requirements, rigid insulation soft materials for construction joints tight; And large-diameter vertical pipe for high temperature pipeline in strict accordance with design drawings called for the establishment of expansion joints and holding bracket; Design requirements into a removable type of insulation, in strict accordance with specifications disconnect from the other insulation; Surface insulation boards in the technology of plastering construction of woven cloth to prevent pollution and protective panels flush with the surface interface, tight and clean. Site measurement of insulation boards for elbow shape cutting, ensure that each piece of lapped traffic, arc transitio