如何用u盘装wn7系统.docVIP

win7 U盘安装方式 先下载软件下载地址 /share/link?shareid 62746uk 座机电话号码9 然后插上U盘?运行 ，然后-打开WIN7的ISO镜像文 4点击“浏览”，找到你计算机上win7系统所在的镜像文件（以iso结尾的文件），然后点击“制作usb启动”，然后就是等待，具体时间有快有慢，根据你的usb性能，和计算机性能确定请耐心等待。 5点击 写入 开始写入 注意U盘会被格式化 有资料请备份? U盘启动盘制作完成?U盘被占用2.44G 注意自己U盘是否够大。。? 二、安装WIN7 重启电脑，进入BIOS 设置开机启动 设置 USB-HDD U盘启动 优先启动?首先进入的是计算机信息菜单栏，包括计算机型号、BIOS版本，以及CPU、内存、硬盘、光驱等主要硬件信息。相关信息如下图： 这里移动键盘左右键，将光标移动至boot选项下，出现如下界面： 这是调整启动设备顺序的界面，将usb-hdd，通过“+”和“-”键，调整至第一启动项（即调整到第一项就可以了），然后按下F10,选“Y”，就可以了。顺便说一下联想的电脑，如果不想进入bios，还可以直接在开机时按下F12,就可以调整启动顺序，设置u盘启动了。 系统自动从U盘运行WIN7安装程序。。? WIN7安装必须要求分区为NTFS，，， 安装界面右边 高级 进去 可以格式化 分区。。?安装完成后 安装过程中 不用激活 注册码不用输入 ?再另外注册 我采用的是 WIN7 软件激活/share/link?shareid 62599uk 座机电话号码9安装完成15分钟。。。。 enforced thermal insulation starts checking system, issued by the thermal insulation construction before you start to notice, transfer inspection of upper and lower operation and transfer of records. For outdoor operation, pipeline equipment to effectively carry out the insulation waterproof measures fail to install protective panels in part with three tarpaulin cover, to prevent insulation from moisture. Insulation seam Michael Jackson 5mm, joints, joints 100mm, insulation thickness tolerance +10MM~ – 5mm , appropriate material elastic banding, spacing according to the design requirements, rigid insulation soft materials for construction joints tight; And large-diameter vertical pipe for high temperature pipeline in strict accordance with design drawings called for the establishment of expansion joints and holding bracket; Design requirements into a removable type of insulation, in strict accordance with specifications disconnect from the other insulation; Surface insulation boards in the technology of plastering construction of woven cloth to prevent pollution and protective panels flush with the surface interface, tight and clean. Site measurement of insulation boards for elbow shape cutting, ensure that each piece of lapped traffic, arc transition of natural, beautiful, screws up. Stamped