引进技术孵化基的构想2.docVIP

引进技术孵化基地 概述 中国经过30年的改革开放 孵化基地 孵化基地的 ●功能区内设置：科研试验室、试产车间、办公室等。 ●生活区内设置：专家公寓、专家健康连锁养生所、职工宿舍、职工食堂；引进一些高端服务机构：银行、物流、会计师事务所、律师事务所、知识产权机构等；生活服务，如：餐饮、购物等。 ●园区单设金融服务平台，与政府（或高新区）平台有机结合，我公司可以为地方高新区嫁接“小微企业扶持债”，可以偏重支持我园区项目，同时争取国家引进技术基金支持。 ●先进农业示范区：农业技术引进后用以示范的基地和有机食品电子+仓储+物流，凡经过我园区技术指导的农产品、食品均可经过此平台交易。 园区总投资规模初步预算在50亿人民币以上，功能区基建费用约15亿元、生活区建设费约10亿元、农业区建设费约5亿元、试验和生产设备投资约10亿元、企业发展资金约10亿元。 四、孵化基地的盈利模式 3.为孵化企业服务，帮助孵化企业的产品进入国内市场，并通过上海自贸区进入国际市场，与孵化企业共赢。 投资计划（实际确定地点后计划） 策划人：北京神州仪亮科技有限公司 胡力游、王淑贤 2013年11月 of support and hanger. Cable hole plugging gaps should use qualified fireproof materials, block surface should have sufficient strength, surface appearance. When cables pass through the firewall, of lax structure of local fire safety clamps. Thermoplastics production, to comply with the process, no bubbles in the thermoplastics pipes, linear nose consistent with the core wire specifications, contact is good, no cracks, break. Tinned copper nose clean solder full exterior surface is smooth without burrs. Control cable Assembly should be fastened, dense, solid, clean, and beautiful. Secondary wiring the cable terminations should be arranged by the actual location of the device line cards, the wiring from the upper to the lower, from left to right in the order. Fixed to maintain consistent spacing between lines, flat, should be around the corner in the same location, same shape, to ensure that the wiring process neater and more elegant. 5 thermal process control measures for quality problems 5.1 control thermal duct system leakage measure to ensure that the use of electric door and actuator installation quality and equipment to the site to check its seal, acceptance, in order to fundamentally solve oil spill problems. Plant for local Panel after installation, in conjunction with the quality Department to check its overall quality, poor-quality parts replacement. Supply good quality of purchasing instrument and ovality of the guarantee instrument tubes as small as possible, selection of high