05100-StructuralSteel(Final).doc-klwtd.info.docVIP

SECTION 05100 STRUCTURAL STEEL PART 1 GENERAL 1.01 Reference Related work specified elsewhere: A. 03300 - Concrete B. 05570 – Misc. Metal Assemblies 1.02 Work Includes: Structural steel framing members, structural steel support members, and other required bracing, welds and fasteners. 1.03 Quality Assurance: A. Codes and Standards 1. ASTM 992 - Structural Steel. 2. ASTM A53 - Hot-Dipped, Zinc Coated Welded and Seamless Steel Pipe. 3. ASTM A325 - High Strength Bolts for Structural Steel Joints. 4. ASTM A490 - Quenches and Tempered Alloy Steel Bolts for Structural Steel Joints. 5. ASTM A500 - Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Round and Shapes. 6. ASTM A572 - High Strength Low Alloy Columbium-Vanadium Steel of Structural Quality. 7. AWS D1.1 - Structural Welding Code. 8. AISC - Specification for the Design Fabrication, and Erection of Structural Steel for Buildings. 9. FS TT-P-31 - Paint, Oil: Iron Oxide, Ready Mix, Red and Brown. 10. AISC - Code of Standard Practice for Steel Buildings and Bridges - Section 4.2.1 shall be specifically excluded. 11. ASTM A124 - Zinc (hot dip galvanized) coating on iron and steel products. 12. AASHTO - Guide Specifications for Fracture Critical. 13. Florida DOT - Standard Specifications for Road and Bridge Construction. 1.04 Submittals: A. Submit under provisions of the General Conditions of the Contract for construction. B. Shop Drawings: 1. Indicate profiles, sizes, spacing, and locations of structural members, openings, attachments and fasteners. 2. All connections. 3. Cambers. 4. Indicate welded connections with AWS A2.0 welding symbols. Indicate net weld lengths. 5. Submit connection calculations for review. See 1.05 (D). C. Manufacturers Mill Certificate: Certifying that rolled sections, high strength bolts and headed shear studs meet or exceed specified requirements. D. Welders Certificates: Certifying welders employed on the Work, verifying AWS qualifications within the previous 12 mont