ControlLogix标准课程.pptVIP

* 控制器的连接(2) 控制器的连接占用（一） 本地框架中的 I/O 模块,每块占用1个连接 远程框架中非离散量模块各占用1个连接 远程框架非优化离散量模块各占1个连接 远程框架所有的优化离散量模块(同一框架)共占1个连接（充当适配器的 CNB 或 ENBT 模块的占用） 每块 DH+/RIO 模块占用1个连接 每块 DNB 模块占用2个连接 每个远程 I/O 的适配器占用1个连接 * 控制器的连接(3) 控制器的连接占用（二） 每个 Produce占用1个连接, 对应Produce 标签外部每一个Consume 标签占用1个连接 控制器中的每一个 Consume 标签占用1个连接 每条 MSG 指令占用1个连接,可以通过取消 MSG 指令中的 Cache Connection 的功能来释放非执行中的 MSG 的连接 RSLogix5000 编程软件在线占用一个连接 RSLinx为 HMI 或第三方软件的访问占用4 个连接 RSLinx Enterprice 为 HMI 或第三方软件的访问占用 5 个连接 请继续学习 ControlLogix 高级课程 * * * * * The implementation will permit the user to define input pins, output pins and even parameters passed by reference (InOut pins). You will be able to specify which of these pins is visible by default and even required. In addition to the input/output parameters, you will also be able to specify internal or local tags that are needed within the instruction. The environment will do automatic datatype conversion for numberic datatypes. If a Bool is passed it must be placed in a BOOL, if a SINT, INT, DINT or REAL are passed they will be converted automatically to the data type specified on the input or the target tag programmed for the output tag. If a compound data type (UDT or Array) is specified, they must have a matching data type. * The implementation will permit the user to define input pins, output pins and even parameters passed by reference (InOut pins). You will be able to specify which of these pins is visible by default and even required. In addition to the input/output parameters, you will also be able to specify internal or local tags that are needed within the instruction. The environment will do automatic datatype conversion for numberic datatypes. If a Bool is passed it must be placed in a BOOL, if a SINT, INT, DINT or REAL are passed they will be converted automatically to the data type specified on the input or the target tag programmed for the output tag. If a compound data type (UDT or Array) is specified, they must have a matching data type. * The imple