NETWORKSITESURVEYFORSOFTWAREINSTALLATION(完美版).doc

NETWORK SITE SURVEY FOR SOFTWARE INSTALLATION CISCO BTS 10200 SOFTSWITCH Company Name: By (Name): Date: . Additional Data (Optional): . PURPOSE This Network Site Survey (NSS) is used to collect the information required by Cisco?BTS?10200? Softswitch application software to communicate with the service provider network.?The information you provide in this NSS will be used by Cisco to?create a customized Network Information Data Sheet (NIDS) for your system. The NIDS contains the?data used during installation of the application software. Cisco will provide a copy of the NIDS to you, and recommends that you retain it in a secure location?for future reference CAUTION This document should be filled out by the system administrator, or with the direct assistance of the system administrator. Entering incorrect data could affect traffic. Do not continue until you have the system administrator’s direct support. The Cisco?BTS?10200?Softswitch relies on Internet Router Discovery Protocol (IRDP) for dynamic updating of routing table. Therefore the service provider network is assumed to be IRDP capable. If this is not the case, contact Cisco TAC for a review of configuration options. If you have any questions, contact Cisco TAC for assistance. PROCEDURE Pages 2 through 13 are used by the service provider to specify network information. The Cisco?BTS?10200?Softswitch relies on this information to identify the host platforms and to access domain names in the DNS. SAMPLE DATA Pages 13 through 22 show a sample of a completed NSS. NETWORK DIAGRAM The figure on pages 7 and 23 show a typical internal network and an example of network redundancy. Intellectual Property Rights This document contains valuable trade secrets and confidential information belonging to Cisco Systems, Inc. and its suppliers. The aforementioned shall