燃烧测试仪-符合VULUL94标准.doc

燃烧测试仪-符合VUL/UL94标准 Test assy for flammability tests according to standard UL94 methods HB, V0, V1, V2, 5VA, 5VB, VTM1, VTM2. 燃烧测试仪-符合UL94标准，方法HB, V0, V1, V2, 5VA, 5VB, VTM1, VTM2. Test chamber, bench model, composed of :由实验箱和长椅组成 Stainless steel structure不锈钢构造 Front glass panes to open for inspection and cleaning前面的玻璃窗可以打开来检查和清洁。 Front panel with two inlets for the operator’s hands for sample and test tools handling inside the test chamber前窗有两个入口，方便操作者把样品和测试工具放置进实验箱内。 Fume aspirator with control pedal to operate at test end.在实验的最后操作具有控制踏板的烟雾吸气器。 Methane gas feeding panel complete with flowmeter with adjusting tap and pressure gauge. 甲烷气输出板配有能调节活栓及压力表的流量计 Measuring and flame adjusting system according to ASTM D 5207, complete with two thermocouples and suitable support to calibrate 20 mm. and 125 mm. flame (optional recording system or digital thermometer – see below).测量和火焰调节系统符合ASTM D 5207标准，配有两个热电偶和相关的支架，校准20mm和125mm火焰（可选件为记录系统或数据热电偶-请参看下方） Timer for flame application.火焰应用的定时器 Accessories to perform tests on films, sheets and bars, inclusive of 包含在薄膜，薄片和条状物上进行测试的配件: - 1 bunsen burner according to ASTM D 5025一个符合ASTM D 5025标准的本生灯火炉 - 2 supports having respectively 20° and 45° inclination 20℃和45℃的倾斜燃烧器支架各一个。 - 1 laboratory stand complete with joints and clamp一个配有接头和夹具的试验柜 - 1 stainless steel screen 20 mesh, about 125 sqmm.一个大约125sq/mm矩形的20目不锈钢筛 - 1 support for soft specimens一个软质样品支架 - 1 stainless steel mandrel dia. mm. 12.7一个直径为12.7mm的不锈钢心轴 Overall dimensions of the test chamber mm. 1500 x 900 x 1200, for an inner volume of minimum 1cum.实验箱外尺寸（mm）：1500 x 900 x 1200，内部体积大约为1立方米。 Code 1005705