三通管加工工艺及夹具设计（有CAD图纸）.pdf

I ABSTRACT Basic process of machining the crankcase of the pump body. The main processing parts processing plane and holes. In general, ensure easy to guarantee precision machining holes than. Therefore, the design principle is first machined surface after machining hole surface. Periodic hole machining plane is obvious that rough machining and machining precision machining hole. Based on the basic input and output, the bottom surface as a good foundation process. The main flow arrangement is supported in the positioning hole of the first, and then the processing hole plane and the hole positioning technology support. The whole process is a combination of the selection tool. Special fixture fixture selection, a self-locking mechanism, therefore, higher productivity, for large quantities, to meet the design requirements. Keywords: crankcase pump body parts; technology; fixture;