毕业设计（论文）-基于51单片机的转速测量仪设计.docVIP

白城职业技术学院毕业论文 转速测量仪设计 学生姓名： 专业班级： 电气自动化 指导教师： 职 称： 起止日期： 白 城 职 业 技 术 学 院 摘 要 本文是基于51单片机的转速测量系统，其测量方法较多，随着单片机对脉冲信号的处理能力越来越强大，使得全数字量系统越来越普及，并且使转速测量系统也可以用全数字化处理。 本设计利用霍尔效应对旋转物体进行检测的转速测量系统。该系统采用UGN3144霍尔传感器把转速信息转换为电压输出，输出电压经整形电路送入AT89C51单片机进行数据处理并用四位7段LED显示器显示测量结果。文中阐述了构成该系统的原理、硬件的实现方法在该系统中对信号频率进行测量，该系统应采用测频法测量给出各部分的原理框图、电路图及转速测量的程序流程图This article is based on 51 monolithic integrated circuits the running speed of the measuring system, the measurement method is more, monolithic integrated circuits to pulses of the more powerful, the whole number of systems is becoming more and more popular, and the speed of measurement system can also use digital. The design of the Hall effect on a rotating object the running speed of the gauging system. The system uses ugn3144 hall at the speed of information to the voltage and output, output voltage electrical at89c51 monolithic integrated circuits after plastic surgery to a data processing and use of four seventh led display displays measurements. The first set out principles constitute the system, hardware, implementation, in the system of the signal frequency is measured, through all kinds of measurement of contrast, the system should be adopted, the frequency of the law. Secondly, the software design, the system contains the system of the design,data, receiving and handling procedures for the design, show programs to the design of the four modules. Finally, the part of the principle of a chart or circuit diagrams and speed of the application processes and make their specific application. In short, this task completed the design of hardware and software system to speed the measuring system of measurement and computation, display, and keyboard and begin to finish the design demands. Keywords monolithic integrated circuits; speeds measure; Hall element 目 录 摘 要 I Abstract II 第1章 绪论 1 1.1 课题研究的目的和意义 1 1.2 转速测量在国内外的研究 1 1.3 主要内容 2 第2章 转速测量系统的总体方案 3 2.1 转速