新技术在电气设备状态检修中的应用探究.docVIP

新技术在电气设备状态检修中的应用 摘要：通过设备状态检修管理促进设备管理水平提高，是工厂系统设备管理中的一大特色，参与设备状态检修管理的发、供电设备的比重和容量也越来越大，目前工厂系统已逐步实现信息化管理。文章主要介绍电气检修一般安全要求及发电机、变压器、高压断路器、电动机、低压配电装置和低压线路等停电检修安全措施和检修安全注意事项。及新技术如红外线、超声波等在电气设备状态检修中的应用问题。 Abstract: through the equipment state overhaul management improve equipment management level, was one of the features of plant equipment management system, participate in equipment maintenance management of the hair, the proportion of power supply equipment and capacity is becoming more and more big, at present, the factory system has gradually realize the informationization management. Article mainly introduces the maintenance general safety requirements and electrical generators, transformers, high voltage circuit breaker, motor, low voltage power distribution equipment and low voltage line outage overhaul safety measures and security considerations. And new technologies such as infrared, ultrasonic, etc. In the application of electrical equipment state overhaul. 　　关键词：新技术；电气设备检修；应用 Key words: new technology; Electrical equipment maintenance and repair; application 　　1　开展电气设备状态检修的意义 1 the significance of improving electrical equipment state overhaul 　　电气设备检修是消除设备缺陷通过检修达到以下目的：消除设备缺陷，排除隐患，保持和恢复设备铭牌出力，提高和保持设备最高效率，电气检修及一般安全要求提高设备健康水平，确保设备安全运行的重要措施。使设备安全运行，延长设备使用年限提高设备利用率。 开展电气设备状态检修有重要的意义，可以归纳为以下几点：被监测设备全过程受控．没有死区；适时维修可避免过剩维修，节约维修资金；适时维修可避免维修不足，可避免设备带病工作，减少事故的发生，减少经济损失；诊断出设备较精确的剩余寿命，合理使用设备，避免设备浪费或设备寿命不足发生事故造成损失。 Electrical equipment repair is to eliminate equipment defects through access to achieve the following objective: eliminate equipment defects, eliminate hidden dangers, maintain and restore equipment nameplate output, improve the maximum efficiency and maintain equipment, electrical maintenance and general safety requirements improve, the health level of equipment of the important measures to ensure the safe operation of the equipment. Make the safe operation of the equipment, extend equipment life improve equipment utilization. Electrical equipment state overhaul h