008-外殼english.docVIP

File No.: CNCA—01C—008：2001 IMPLEMENTION RULES FOR COMPULSORY CERTIFICATION OF ELECTRICAL AND ELECTRONIC PRODUCTS Switches for Circuits, Installation Protective and Connection Devices Enclosures for Accessories for Household and Similar Fixed Electric Installations Announced on Dec.7, 2001 Implemented on May 1, 2002 Certification and Accreditation Administration of People’s Republic of China CONTENTS 1. Scope 3 2. Certification model 3 3. Major processes for certification 4 3.1 Application for certification 4 3.2 Type testing 4 3.3 Initial inspection of the factory 4 3.4 Evaluation of certification results and approval of certification 4 3.5 Follow-up inspection 4 4. General requirements for certification 4 4.1 Application for certification 4 4.2 Type testing 5 4.3 Initial inspection of the factory 6 4.4 Evaluation of certification results and approval of certification 7 4.5 Follow-up inspection 8 5. Certificate 9 5.1 The maintenance of the certificates 9 5.2 Extension of certified products 10 5.3 The suspension, cancellation and withdrawal of the certificates 10 6. Use of compulsory products certification mark 10 6.1 Design of the mark allowed to use 10 6.2 Derivations of certification mark 11 6.3 Ways of use 11 6.4 Location of the mark 11 7. Charge 11 Appendix 1 13 Appendix 2 14 COMPLEMENTION RULES FOR COMPULSOEY CERTIFICATION OF ELECTRICIAL AND ELECTRONIC PRODUCTS Switches for Circuits, Installation Protective and Connection devices Enclosures for Accessories for Household and Similar Fixed Electric Installations 1. Scope This document applies to enclosures or parts of enclosures for accessories with a rated voltage not exceeding 440V intended for household or similar fixed electrical installations, either indoors or outdoors, and also applies to boxes intended for the mounting or suspension of luminaires. This document does not apply to enclosures for assemblies containing overcurren