【英语版】国际标准 ISO 6984:1981 EN Unalloyed steel wires for stranded wire ropes for mine hoisting — Specifications 矿用提升绞线用非合金钢丝 规范.pdf
- 3
- 0
- 2025-01-09 发布于四川
-
正版发售
- 废止
- 已被废除、停止使用,并不再更新修订
- | 1981-11-01 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO6984:1981标准是一套针对无合金钢丝绳索具的规格标准,适用于矿山提升用的绳索。该标准详细规定了钢丝绳的物理性能、化学成分、尺寸、试验方法和验收规则等。
具体来说,该标准主要涵盖以下内容:
1.物理性能:包括钢丝绳的直径、长度、弹性模量、密度等基本物理参数。
2.化学成分:规定了钢丝绳中各种元素的含量,以确保其性能符合要求。
3.尺寸:详细描述了钢丝绳的线径、绳径、股数、节距、捻向等几何尺寸。
4.试验方法:规定了各种试验方法和测试设备,以确保钢丝绳的质量符合标准。
5.验收规则:规定了验收标准和验收程序,以确保购买的钢丝绳符合要求。
ISO6984:1981标准还规定了其他相关事项,如包装、标记、运输和储存等。这些规定旨在确保钢丝绳在运输、储存和使用过程中的安全性和可靠性。
ISO6984:1981标准是一套详细规范无合金钢丝绳索具规格的标准,对于确保矿山提升用绳索的质量和安全性具有重要意义。
您可能关注的文档
- 国际标准 ISO 6969:1999 EN 道路车辆 音响信号装置 安装在车辆上后的测试 Road vehicles — Sound signalling devices — Tests after mounting on vehicle.pdf
- 国际标准 ISO 6969:1999 EN Road vehicles — Sound signalling devices — Tests after mounting on vehicle 道路车辆 音响信号装置 安装在车辆上后的测试.pdf
- 国际标准 ISO 697:1975 EN 标题丢失 遗留纸质文件 Title missing - Legacy paper document.pdf
- 国际标准 ISO 697:1975 EN Title missing - Legacy paper document 标题丢失 遗留纸质文件.pdf
- 国际标准 ISO 6970:1994 EN 摩托车和轻便摩托车 污染测试 底盘测功机工作台 Motorcycles and mopeds — Pollution tests — Chassis dynamometer bench.pdf
- 国际标准 ISO 6970:1994 EN Motorcycles and mopeds — Pollution tests — Chassis dynamometer bench 摩托车和轻便摩托车 污染测试 底盘测功机工作台.pdf
- 国际标准 ISO 6971:1982 EN 焊接钢制曲柄链节拖链和链轮 Welded steel type cranked link drag chains and chain wheels.pdf
- 国际标准 ISO 6971:1982 EN Welded steel type cranked link drag chains and chain wheels 焊接钢制曲柄链节拖链和链轮.pdf
- 国际标准 ISO 6972:1982 EN 焊接钢制曲柄链节轧机链条和链轮 Welded steel type cranked link mill chains and chain wheels.pdf
- 国际标准 ISO 6972:1982 EN Welded steel type cranked link mill chains and chain wheels 焊接钢制曲柄链节轧机链条和链轮.pdf
- 国际标准 ISO 6984:1990 EN 用于矿山提升用绞绳的绞绕用非合金钢线材规范 Round non-alloy steel wires for stranded wire ropes for mine hoisting — Specifications.pdf
- 国际标准 ISO 6984:1990 EN Round non-alloy steel wires for stranded wire ropes for mine hoisting — Specifications 用于矿山提升用绞绳的绞绕用非合金钢线材规范.pdf
- 国际标准 ISO 6986:1983 EN 带可转位刀片的侧铣刀和面铣刀(开槽铣刀) 尺寸 Side and face milling (slotting) cutters with indexable inserts — Dimensions.pdf
- 国际标准 ISO 6986:1983 EN Side and face milling (slotting) cutters with indexable inserts — Dimensions 带可转位刀片的侧铣刀和面铣刀(开槽铣刀) 尺寸.pdf
- 国际标准 ISO 6987:1998 EN 可转位硬质材料刀片,圆角,带部分圆柱形固定孔 尺寸 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions.pdf
- 国际标准 ISO 6987:1998 EN Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions 可转位硬质材料刀片,圆角,带部分圆柱形固定孔 尺寸.pdf
- 国际标准 ISO 6987-1:1983 EN 带圆角和部分圆柱形固定孔的可转位硬质合金(硬质合金)刀片 第1部分:正常间隙为 7 度的刀片尺寸 Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance.pdf
- 国际标准 ISO 6987-1:1983 EN Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance 带圆角和部分圆柱形固定孔的可转位硬质合金(硬质合金)刀片 第1部分:正常间隙为 7 度的刀片尺寸.pdf
- 国际标准 ISO 6987-2:1990 EN 用于切削工具的可转位刀片 带圆角和部分圆柱形固定孔的硬质合金(硬质合金)刀片 第2部分:正常间隙为 11 度的刀片尺寸 Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with .pdf
- 国际标准 ISO 6987-2:1990 EN Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance 用于切削工具的可转位刀片 带圆角和部分圆柱形固定孔的硬质合金(硬.pdf
文档评论(0)