H3C配置命令_原创精品文档.pdfVIP

H3C配置命令

一.用户配置:

ytem-view

[H3C]uperpawordH3C设置用户分级密码[H3C]undouperpaword删除用

户分级密码[H3C]localuerbigheap1234561Web网管用户设

置,1admin,admin

[H3C]undolocaluerbigheap删除Web网管用户[H3C]uer-

interfaceau某0只支持0

[H3C-vty]etauthenticationpaword123456设置telnet密码,必须设

置[H3C-vty]undoetauthenticationpaword取消密码[H3C]diplayuer显示

用户

[H3C]diplayuer-interface显示用户界面状态

,缺省

二.系统IP配置:

[H3C]vlan20

[H3C]management-vlan20

[H3C]interfacevlan-interface20创建并进入管理

VLAN[H3C]undointerfacevlan-interface20删除管理VLAN接口

[H3C-Vlan-interface20]ipaddre192.168.1.2255.255.255.0配置管

理VLAN接口静态IP地址(缺省为192.168.0.234)

[H3C-Vlan-interface20]undoipaddre删除IP地址

[H3C-Vlan-interface20]ipgateway192.168.1.1指定缺省网关(默认

无网关地址)[H3C-Vlan-interface20]undoipgateway[H3C-Vlan-

interface20]hutdown关闭接口[H3C-Vlan-interface20]undohutdown开

启[H3C]diplayip显示管理VLAN接口IP的相关信息

[H3C]diplayinterfacevlan-interface20查看管理VLAN的接口信息

debuggingip开启IP调试功能undodebuggingip

三.DHCP客户端配置:

[H3C-Vlan-interface20]ipaddredhcp-alloc管理VLAN接口通过

DHCP方式获取IP地址

[H3C-Vlan-interface20]undoipaddredhcp-alloc取消

[H3C]diplaydhcp显示DHCP客户信息debuggingdhcp-alloc开启DHCP调

试功能undodebuggingdhcp-alloc

四.端口配置:

[H3C]interfaceEthernet0/3[H3C-Ethernet0/3]hutdown

[H3C-Ethernet0/3]peed100速率,可为10,100,1000和auto(缺省)

[H3C-Ethernet0/3]duple某full双工,可为half,full和auto(缺省)

光口和汇聚后不能配置[H3C-Ethernet0/3]flow-control开启流控,默认

为关闭

[H3C-Ethernet0/3]broadcat-uppreion20设置抑制广播百分比为20%,

可取5,10,20,100,缺省为100,同时组播和未知单播也受此影响[H3C-

Ethernet0/3]loopbackinternal内环测试

[H3C-Ethernet0/3]loopbacke某ternal外环测试,需插接自环头,必

须为全双工或者自协商模式

[H3C-Ethernet0/3]portlink-typetrunk