【英语版】国际标准 ISO 1151-9:1993/AMD 1:1998 EN Flight dynamics — Concepts, quantities and symbols — Part 9: Models of atmospheric motions along the trajectory of the aircraft — Amendment 1: Turbulence 飞行动力学 概念、数量和符号 第9部分:沿飞机轨迹的大气运动模型 修正案1:湍流.pdf
- 1
- 0
- 2024-07-18 发布于四川
-
正版发售
- 废止
- 已被废除、停止使用,并不再更新修订
- | 1998-10-01 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO1151-9:1993/Amd1:1998是国际标准化组织(ISO)制定的航空飞行动力学标准的一部分,该标准提供了飞行动力学的基本概念、量度和符号。该标准分为九个部分,其中第九部分是关于飞机飞行路径上大气运动模型的修订一(Amendment1)。
在修订一中,主要讨论了乱流(turbulence)对飞行的影响。乱流是指大气中不规则的气流运动,它可以影响飞机的飞行路径和速度,对飞行安全造成潜在的威胁。因此,飞行员和飞行控制系统需要了解并适应这些乱流的影响。
具体来说,ISO1151-9:1993/Amd1:1998标准中,修订一涉及到的乱流模型可能包括其强度、频率、持续时间等参数,以及如何将这些参数纳入飞行控制系统和飞行路径规划中。
ISO1151-9:1993/Amd1:1998标准中的修订一提供了对大气乱流这一重要飞行影响因素的深入理解,对于保障飞行安全具有重要意义。
如果您对ISO标准或飞行动力学有更具体的问题,欢迎向我提问。
您可能关注的文档
- 国际标准 ISO 11482:1993 EN 核后处理厂二氧化钚(PuO2)取样准则 Guidelines for plutonium dioxide (PuO2) sampling in a nuclear reprocessing plant.pdf
- 国际标准 ISO 11482:1993 EN Guidelines for plutonium dioxide (PuO2) sampling in a nuclear reprocessing plant 核后处理厂二氧化钚(PuO2)取样准则.pdf
- 国际标准 ISO 11483:2005 EN 核燃料技术 钚源的制备和通过阿尔法光谱法确定 238Pu/239Pu 同位素比率 Nuclear fuel technology — Preparation of plutonium sources and determination of 238Pu/239Pu isotope ratio by alpha spectrometry.pdf
- 国际标准 ISO 11483:2005 EN Nuclear fuel technology — Preparation of plutonium sources and determination of 238Pu/239Pu isotope ratio by alpha spectrometry 核燃料技术 钚源的制备和通过阿尔法光谱法确定 238Pu/239Pu 同位素比率.pdf
- 国际标准 ISO 11484:2019 EN 钢铁产品 雇主无损检测(NDT)人员资格认证体系 Steel products — Employer's qualification system for non-destructive testing (NDT) personnel.pdf
- 国际标准 ISO 11484:2019 EN Steel products — Employer's qualification system for non-destructive testing (NDT) personnel 钢铁产品 雇主无损检测(NDT)人员资格认证体系.pdf
- 国际标准 ISO 11485-1:2011 EN 建筑玻璃 弧形玻璃 第1部分:术语和定义 Glass in building — Curved glass — Part 1: Terminology and definitions.pdf
- 国际标准 ISO 11485-1:2011 EN Glass in building — Curved glass — Part 1: Terminology and definitions 建筑玻璃 弧形玻璃 第1部分:术语和定义.pdf
- 国际标准 ISO 11485-2:2011 EN 建筑玻璃 曲面玻璃 第2部分:质量要求 Glass in building — Curved glass — Part 2: Quality requirements.pdf
- 国际标准 ISO 11485-2:2011 EN Glass in building — Curved glass — Part 2: Quality requirements 建筑玻璃 曲面玻璃 第2部分:质量要求.pdf
- 国际标准 ISO 11519-1:1994 EN 公路车辆 低速串行数据通信 第1部分:概述和定义 Road vehicles — Low-speed serial data communication — Part 1: General and definitions.pdf
- 国际标准 ISO 11519-1:1994 EN Road vehicles — Low-speed serial data communication — Part 1: General and definitions 公路车辆 低速串行数据通信 第1部分:概述和定义.pdf
- 国际标准 ISO 11519-3:1994 EN 公路车辆 低速串行数据通信 第3部分:车载区域网络 (VAN) Road vehicles — Low-speed serial data communication — Part 3: Vehicle area network (VAN).pdf
- 国际标准 ISO 11519-3:1994 EN Road vehicles — Low-speed serial data communication — Part 3: Vehicle area network (VAN) 公路车辆 低速串行数据通信 第3部分:车载区域网络 (VAN).pdf
- 国际标准 ISO 11519-3:1994/AMD 1:1995 EN 公路车辆 低速串行数据通信 第3部分:车载区域网络(VAN) 修正案1 Road vehicles — Low-speed serial data communication — Part 3: Vehicle area network (VAN) — Amendment 1.pdf
- 国际标准 ISO 11519-3:1994/AMD 1:1995 EN Road vehicles — Low-speed serial data communication — Part 3: Vehicle area network (VAN) — Amendment 1 公路车辆 低速串行数据通信 第3部分:车载区域网络(VAN) 修正案1.pdf
- 国际标准 ISO 11520-1:1997 EN 农业谷物干燥机 干燥性能的测定 第1部分:总论 Agricultural grain driers — Determination of drying performance — Part 1: General.pdf
- 国际标准 ISO 11520-1:1997 EN Agricultural grain driers — Determination of drying performance — Part 1: General 农业谷物干燥机 干燥性能的测定 第1部分:总论.pdf
- 国际标准 ISO 11520-2:2001 EN 农用谷物干燥机 干燥性能的测定 第2部分:附加程序和作物特定要求 Agricultural grain driers — Determination of drying performance — Part 2: Additional procedures and crop-specific requirements.pdf
- 国际标准 ISO 11520-2:2001 EN Agricultural grain driers — Determination of drying performance — Part 2: Additional procedures and crop-specific requirements 农用谷物干燥机 干燥性能的测定 第2部分:附加程序和作物特定要求.pdf
文档评论(0)