【英语版】国际标准 ISO 11665-7:2012 EN Measurement of radioactivity in the environment — Air: radon-222 — Part 7: Accumulation method for estimating surface exhalation rate 环境中放射性的测量 空气:氡-222 第7部分:估算表面呼出率的累积法.pdf
- 1
- 0
- 2024-07-18 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2012-07-13 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO11665-7:2012EN环境放射性测量-空气-氡-222-第7部分:估计表面呼出率之积累方法。
ISO11665-7是国际标准化组织(ISO)制定的一项测量标准,专门用于环境放射性测量。其中,关于氡-222(radon-222)的测量是该标准的重要部分。该标准详细描述了测量环境中氡-222的各种方法,包括积累法,这是一种估计表面呼出率的方法。
在执行这种方法时,通常会通过空气取样设备采集一定时间范围内的空气样本,以确定空气中氡-222的浓度。接着,使用一个被称为表面呼出率计的设备来估计氡-222从地面逸出的速率。这包括通过收集一段时间内收集的放射性物质数量来确定土壤中氡-222的累积量,再根据特定的计算公式将这些数据转化为表面的呼出率。
这种方法的准确性和可靠性取决于多种因素,包括样本采集和处理的程序、收集设备的性能以及当地的环境条件等。因此,在实际操作中,可能需要考虑一些额外的步骤和标准来确保结果的准确性和可靠性。
您可能关注的文档
- 国际标准 ISO 11641:2012 EN 皮革 色牢度测试 汗渍色牢度 Leather — Tests for colour fastness — Colour fastness to perspiration.pdf
- 国际标准 ISO 11641:2012 EN Leather — Tests for colour fastness — Colour fastness to perspiration 皮革 色牢度测试 汗渍色牢度.pdf
- 国际标准 ISO 11642:2012 EN 皮革 色牢度测试 耐水色牢度 Leather — Tests for colour fastness — Colour fastness to water.pdf
- 国际标准 ISO 11642:2012 EN Leather — Tests for colour fastness — Colour fastness to water 皮革 色牢度测试 耐水色牢度.pdf
- 国际标准 ISO 11643:2009 EN 皮革 色牢度测试 小样品对溶剂的色牢度 Leather — Tests for colour fastness — Colour fastness of small samples to solvents.pdf
- 国际标准 ISO 11643:2009 EN Leather — Tests for colour fastness — Colour fastness of small samples to solvents 皮革 色牢度测试 小样品对溶剂的色牢度.pdf
- 国际标准 ISO 11644:2022 EN 皮革 涂饰附着力测试 Leather — Test for adhesion of finish.pdf
- 国际标准 ISO 11644:2022 EN Leather — Test for adhesion of finish 皮革 涂饰附着力测试.pdf
- 国际标准 ISO 11646:2014 EN 皮革 面积测量 Leather — Measurement of area.pdf
- 国际标准 ISO 11646:2014 EN Leather — Measurement of area 皮革 面积测量.pdf
- 国际标准 ISO 11665-8:2019 EN 环境中放射性的测量 空气:氡-222 第8部分:建筑物内初始调查和补充调查的方法 Measurement of radioactivity in the environment — Air: radon-222 — Part 8: Methodologies for initial and additional investigations in buildings.pdf
- 国际标准 ISO 11665-8:2019 EN Measurement of radioactivity in the environment — Air: radon-222 — Part 8: Methodologies for initial and additional investigations in buildings 环境中放射性的测量 空气:氡-222 第8部分:建筑物内初始调查和补充调查的方法.pdf
- 国际标准 ISO 11665-9:2019 EN 环境中放射性的测量 空气:氡-222 第9部分:建筑材料呼出率的测试方法 Measurement of radioactivity in the environment — Air: Radon-222 — Part 9: Test methods for exhalation rate of building materials.pdf
- 国际标准 ISO 11665-9:2019 EN Measurement of radioactivity in the environment — Air: Radon-222 — Part 9: Test methods for exhalation rate of building materials 环境中放射性的测量 空气:氡-222 第9部分:建筑材料呼出率的测试方法.pdf
- 国际标准 ISO 11666:2018 EN 焊缝的非破坏性检测 超声波检测 验收等级 Non-destructive testing of welds — Ultrasonic testing — Acceptance levels.pdf
- 国际标准 ISO 11666:2018 EN Non-destructive testing of welds — Ultrasonic testing — Acceptance levels 焊缝的非破坏性检测 超声波检测 验收等级.pdf
- 国际标准 ISO 11667:1997 EN 纤维增强塑料 模塑化合物和预浸料 树脂、增强纤维和矿物填料含量的测定 溶解方法 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods.pdf
- 国际标准 ISO 11667:1997 EN Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods 纤维增强塑料 模塑化合物和预浸料 树脂、增强纤维和矿物填料含量的测定 溶解方法.pdf
- 国际标准 ISO 11668:1997 EN 油漆和清漆的粘合剂 氯化聚合树脂 一般试验方法 Binders for paints and varnishes — Chlorinated polymerization resins — General methods of test.pdf
- 国际标准 ISO 11668:1997 EN Binders for paints and varnishes — Chlorinated polymerization resins — General methods of test 油漆和清漆的粘合剂 氯化聚合树脂 一般试验方法.pdf
文档评论(0)