Carrier开利Gemini® Packaged Heat Pump Air-Handling Unit with EcoBlue™ Technology 40RFQ 40RFQ Guide Specifications, 2,400 to 3,000 Nominal cfm, 6 to 10 Nominal Tons说明书用户手册.doc

PAGE 1 PAGE 1 Split System Heat Pump Indoor Unit (Air-Handling Unit) with Puron? Refrigerant HVAC Guide Specifications Size Range: 2,400 to 3,000 cfm, Nominal Airflow 6 to 10 Tons, Nominal Cooling Carrier Model Numbers: 40RFQ*07-12 General System Description Indoor, packaged air-handling unit for use in commercial heat pump split systems. Unit shall have a multi-position design and shall be capable of horizontal or vertical installation on a floor or in a ceiling, with or without ductwork. (Only vertical units are to be applied without ductwork.) Unit shall function as the indoor component of an air-to-air electric heat pump system. Unit must be designed with a Puron? (R-410A) refrigerant circuit with a matching air-cooled condensing unit 38AUQ, for matched systems approved by the manufacturer. Quality Assurance All coils shall be designed and tested in accordance with ASHRAE 15 Safety Code for Mechanical Refrigeration, latest edition. Unit shall be constructed in accordance with ETL and ETL, Canada, standards and shall carry the ETL and ETL, Canada, labels. Unit insulation and adhesive shall comply with NFPA-90A requirements for flame spread and smoke generation. Insulation shall be treated with an immobilized antimicrobial agent to inhibit the growth of bacteria and fungi on the insulation as proven by tests in accordance with ASTM standards G21 and 22 (U.S.A.). Unit shall be manufactured in a facility registered to the ISO 9001 manufacturing quality standard. Direct-expansion coils shall be leak tested at 150?psig and pressure tested at 650 psig and qualified to UL burst test at 1980 psig. Delivery and Storage Units shall be stored and handled per manufacturers recommendation. Products Equipment Base Unit: Indoor mounted, draw-thru, packaged air-handling unit that can be used in a suspended horizontal configuration or a vertical configuration. Unit shall consist of a direct drive vane axial fan and motor assembly, pre-wired fan motor controller, factory-ins