MIB-Tutorial原版完整文件.docxVIP

Specific Method of Using MIB Embedded in Fuji Xerox-based Device (Tutorial) Version 2.0E Issued in March 2013 . Introduction This manual describes how to use the MIB (Management Information Base), which is embedded in the Fuji Xerox– based device (Printer of Multifunction Machine) specifically as a tutorial. This is supplemental information required to obtain the Fuji Xerox –based Multifunctional Machine / Printer status with SNMP protocol. Necessary OID can be identified accoring to what user wants to monitor and OID is indicated as Name in this manual. Please pick up the numbers corresponding to each name of OID from MIB information. SNMP protocol commands to call each OID are indicated by boldface (Get, GetNext, Set). For example, Get SysDescr.0 SysDescr.0 String(25):FUJI XEROX ApeosPort-IV C5570 means that Get SysDescr.0(1.3.6.1.2.1.1.1.0) is being sent using Get command of SMNP and the character string “FUJI XEROX ApeosPort-IV C5570” in 25 bytes is returned. iFujiXerox Co.,Ltd.Specific Method of Using MIB Embedded in FX Device(Tutorial)Scoping disclosure： i FujiXerox Co.,Ltd. Specific Method of Using MIB Embedded in FX Device(Tutorial) Scoping disclosure： An access rights specified in the confirmation on the use of output-based technical information, and Fuji Xerox company Table of Contents Device Status 1 To Determine If Print Output Is Possible 1 Determine the Error Status 1 Information about Whole System/Host/Printer 3 To Determine Device Model 3 To Obtain Feeder Tray Information of Printer 3 To Obtain Supplies Information of Printer 3 To Detect Replaceement of Consumables 4 To Obtain the Information of Meter 6 Job Information 9 To Obtain the List of Job in Process 9 To Obtain Attribute Information of Job in Process 9 To Confirm the Status of Job in Process 9 Get the Finished Job List 9 To Obtain the Number of Output Faces and Output Pages per Job 10 When User Wants to Trace the Jobs, Which One Has Transmitted By Oneself, Efficiently 11 When User Wants to K