Fuji富士电机-仪器仪表操作说明书-FSV-2 功能增强型超声波流量计（英文）.pdf

Instruction Manual ULTRASONIC FLOWMETER FLOW TRANSMITTER ADVANCED TYPE TYPE: FSV-2 INF-TN2FSVL-E PREFACE We thank you very much for purchasing Fuji Electric’s ultrasonic flow meter. The instruction manual concerns the installation, operation, checkup, and maintenance of the Flow transmitter (FSV) of ultrasonic flow meter. Read it carefully before operation.  First read this instruction manual carefully until an adequate understanding is acquired, and then proceed to installation, operation, and maintenance of the flow meter. Improper handling may result in an accident or a failure.  The specifications of this flow meter are subject to change without prior notice for improvement of the product.  Do not attempt to modify the flow meter without permission. Fuji will not bear any responsibility for a trouble caused by such a modification. If it becomes necessary to modify the flow meter, contact our office in advance.  This instruction manual should always be kept on hand by the operator.  After reading the manual, be sure to store it at a place easier to access.  This instruction manual should be delivered to the end user.  If the instruction manual has been lost, request another one (with charge) to our local business office. Manufacturer: Fuji Electric Co., Ltd. Type: Described in the nameplate put on the main body Date of manufacture: Described in the nameplate put on the main body Product nationality: Japan ©Fuji Electric Co., Ltd. 2013 Note Issued in September.,