惠普ColorSpan Legacy 打印机ColorSpan DisplayMaker Legacy UVR UVX 600x300 Print Resolution Frequently Asked Questions说明书用户手册.pdf

UV Solvent Printers 600 x 300 Print Resolution FAQ 1 Introduction This document answers some of the frequently asked questions (FAQ) regarding the 600x300 dpi print resolution feature found on selected HP and ColorSpan Legacy printers. The FAQ 1. What printers have 600x300 capability? 600x300 is available on the following printer models: ○ DisplayMaker 72UVX 98UVX ○ DisplayMaker 72SI 98SI, DisplayMaker 98SX ○ HP Scitex FB910 (ColorSpan 9840uv The HP Designjet H series also has 600x300 capability, but this printer is not discussed in this document. 2. On printers with 600x300, what are the available print modes? Solvent printers with 600x300 capability have 600x300 High Quality, 600x300 Production, 600x300 Billboard modes. The UV printers have 600x300 Production only. A 600x300 Billboard mode on the UV printers would move the media past the lamps too quickly for the ink to cure. 3. What are the print speeds in all print modes? The table below shows the various speeds of all print modes available across the platforms. See question #1 to confirm what printers have what modes. Table 1 Print Speeds by Resolution Printer Width Print Resolution Square Feet Per Hour at Maximum Width, Bidirectional Billboard Production High Quality 600x600 400 200 100 72