RS Components 电工电料 周转车 300mm宽x300mm长x100mm高 使用说明.pdfVIP

InstructIons for: CORNER MOVERS 4PC MoDEL no: CM4 IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY INSTRUCTIONS 1.1 GENERAL SAFETY Plain washer  WARNING! Ensure Health Safety, and local authority regulations Ball race journal are adhered to when assembling and using this corner moving system.  Keep the general area where used clean, uncluttered and ensure there is adequate lighting.  WARNING! use on a level and solid surface such as concrete.  DO NOT use the corner moving system for any purpose other than that for which it is designed.  Ensure that the corner movers are properly assembled before loading.  DO NOT overload the corner movers, 37.5 kgs per corner mover.  We recommend two operators for heavier loads. fig.1  Always push the loaded corner movers as near to bottom of the load as sensibly practical to avoid tipping hazard.  Always use all 4 corner movers to transport the load. fig.3  DO NOT let go of the load whilst in motion. 2. INTRODUCTION Heavy-duty corner movers manufactured from high quality steel with a maximum load weight of 150kg. Ideal for moving awkward