cfx流体学习icem cfd培训教程geo.pptxVIP

FEA Model : Workshop 3HVAC Panel Create a Project Choose File Open Project Browse to HvacPanel working directory Type in the File name as: midsurf.prj Tips: The pull down next to the file name can be used to quickly locate recently used projects. In Windows, The File browser is a standard Windows file browser offering all the functionality of windows explorer. In Unix or Linux, similar functionality is also available. The Project file contains information about project settings, the working folder and file associations. Once the geometry, mesh, boundary conditions, parameter files etc. are saved with the project file, simply loading the project file will also load these associated files. Import Geometry Import The Geometry: File - Geometry - Open Geometry Select panel_input.tin Initially the surfaces are turned off. Turn on surfaces under geometry tree #1 #2 #3 Build Diagnostic Topology Geometry - Repair Geometry - Build Diagnostic Topology Use Tolerance of 0.005 Turn on Part by part Toggle on Single curve cleanup Set Single Edge Tolerance to 0.01 Accept all others default Apply #1 #2 #6 #3 #4 #5 Mid surface compression Geometry - Create/Modify surfaces - Midsurface Change Method to By Parts Set Search distance to 0.046 Select CORNER, SIDE1 and SIDE2.2 Hit Apply #2 Surface offset Geometry - Create/Modify surfaces - Offset Surface Right Mouse click near Create/Modify Surface and toggle off Inherit part Set part to TOP_MIDSURF Set Distance to 0.0175 Select a surface on the top part as shown and flood fill Hit Apply Mid-surface is created in the part named TOP_MIDSURF Build Diagnostic topology RMB on part TOP and select Delete Geometry - Repair geometry - Build Diagnostic topology Right Mouse click near Create/Modify Surface and select Inherit part Use Tolerance of 0.005 Turn on Part by part Toggle on Single curve cleanup Set Single Edge Tolerance 0.01 Accept all others default Apply #1 #3 #5 #6 #4 #2 Remove Buttons Geometry - Repair geometry - Feature