RS Components 电工电料 电源适配器 SA115B ACTE Kit 使用说明.pdfVIP

SA115B ACTE Kit Supplied by 15V PSU for Cinterion, MC Tech CEP modems – kit overview and contents The SA115B ACTE Kit is used for provision of DC power to Cinterion, MC-Technologies and CEP modems from the AC Mains Supply. The DC output of the power supply unit is terminated with a 6-Pole modular connector, often referred to as either a RJ11 or RJ12 connector. The 6-way Modular connector is wired according to the requirements of the Terminals / Modems manufactured by the above companies, and includes The SA115B ACTE Kit contains the following: 1-off SA115B ACTE ‘in-line’ power supply unit (specifications as below) 1-off Mains cable with UK 3-Pin plug (BS 1363) and IEC 60320-C7 ‘Figure-8’ connectors. 1-off Mains cable with European 2-Pin plug (CEE 7/16 “europlug” or IEC-C5) and IEC 60320-C7 ‘Figure-8’ connectors. SA115B ACTE Kit – kit overview and contents continued Both of the included mains cables are provided for connecting AC mains power to the input of the in- line power supply. Other cables with suitable termination for the local requirements and a ‘figure-8’ plug may be used. The supply voltage and cable/connectors used must meet the requirements of the SA115B ACTE power supply and local regulations. Specification of the in-line power supply unit - SA115B ACTE Input: 100 to 240 Volts a.c., 50 to 60 Hz. 0.4 Amps Output: 15 Volts D.C. Regulated, 1.0 Amps Max Power Rating: 15W Mains PSU input connector: IEC 60320-C8. Suitable mains leads required an IEC 60320-C7 plug for insertion