磁粉、渗透检测规程.doc

磁粉、渗透检测规程 Written Procedure for MT PT 编 制 日 期 PREPARED BY： DATE： 审 核 日 期 REVIEWEDBY： DATE： 批 准 日 期 APPROVED BY： DATE： 认 可 日 期 ACCEPTED BY： DATE：  Contents目录 Item项目 Page 1.0 Scope范围 ……………………………………………….. 2.0 Reference参考 3.0 Personnel Requirements人员要求 ……………………. 4.0 Equipment设备……………………………………………. 5.0 Calibration校准…………………………………………... 6.0 Technical Requirements.技术要求 7.0 MT Inspection procedure MT检测规程 8.0 MT additional and modifications requirements MT附加要求 9.0 MT Acceptance Standards.MT验收标准 10.0 PT Inspection procedure PT检测规程 11.0 PT additional and modifications requirements PT附加要求 12.0 PT Acceptance Standards PT验收标准 13.0 Extent of testing检测比例 14.0 Repairs返修…………………………………………….. 15.0 Report报告……………………………………………….. Attachment 1 The format of MT report MT报告格式 ………………... Attachment 2 The format of PT report PT报告格式…………………... 1.0 Scope范围 1.1 This written procedure provides the technical requirements and acceptance standards of MT and PT for welded SWP products in accordance with the SWP PS document. 本规程依据西门子风电的采购标准提供了MT和PT的技术要求和验收标准。 1.2 This procedure shall be released by demonstration to the satisfaction of the SWP prior to implementation. 本规程在实施前应经西门子风电的验证和释放。 2.0 Reference参考 2.1 Normative references are cited at appropriate in the text. The references have been listed below. For dated references,any subsequent amendments to or revisions of these publications only apply to this specification if they have been included through amendment or revision.For undated references the latest edition of the publication,which is referred to, applies. 下面列出的这些标准文件在正文的适当地方被引用。 对于标注日期的参考文献（的后续修改或修订），仅当对其的修正改进被整合时，才能被应用到本规范中。对于未标日期的参考标准，