PreiPolar机组控制盘指导手册.pdf

PREIPOLAR Engineering Private Limited Factory: 5/214, Kannadapalayam Road, Papanchatram, Poonamallee, Chennai – 602103 India. Tel: +91-44 Fax: +91-44Website: E-Mail: Info@ Panel manufacturer recommends that instructions about minimum scheduled maintenance shown in this manual are carefully followed. Utilizer according to his experience in operating the panel would optimize the timings of maintenance which, however, cannot be decreased below what shown here under. TIMINGS CHECKS - every 6 months Filters cleaning Test the safety limit switches - every 12 months Check tightening of Terminals/contactors In case utilizer has requested special components which require particular maintenance, follow the instructions in the data sheets books both for service and for replacement in case of failure. IMPORTANT Always fill the proper report at the end of each maintenance service. IMPORTANT ! Panel periodically cleaning will guarantee its long-lasting and safe working IMPORTANT ! Never use water to clean the panel! IMPORTANT At the end of this control panel operating life, all the contained devices must be dismantled according to 2002/96/CE (WEEE – Waste from Electrical and Electronic Equipments). PREIPOLAR Engineering PREIPOLAR Engineering PPrivate rivate LLimitedimited PREIPOLAR Engineering PREIPOLAR Engineering PPrivate rivate LLimitedimited PREIPOLAR Engineering Private Limited Factory: 5/214, Kannadapalayam Road, Papanchatram, Poonamallee, Chennai – 602103 India. Tel: +91-44 Fax: +91-44Website: E-Mail: Info@ 2.8 Scheduled Maintenance DATE PERFORMED CHECKS PERSON IN CHARGE PREIPOLAR Engineering PREIPOLAR Engineering PPrivate rivate LLimitedimited PREIPOLAR Engineering PREIPOLAR Engineering PPrivate rivate LLimitedimited PREIPOLAR Engineering Private Limited Factory: 5/214, Kannadapalayam Road, Papanchatram, Poonamallee, Chennai – 602103 India. Tel: +91-44 Fax: +91-44Website: E-Mail: Info@ 3 – PANEL DATA SHEET