BSEN 1175-3-1998中文版-工业用货车安全——电气要求.docVIP

BRITISH STANDARD 英国标准 Safety of industrial trucks — Electrical requirements — 工业用货车安全——电气要求 Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks 第3部分：内燃机驱动货车电力传输系统的特殊要求 BSEN 1175-3:1998 The European Standard EN 1175-3:1998 has the status of a British Standard 本欧洲标准EN 1175-3:1998具有英国标准地位 ICS 53.060 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGKT LAW 未经版权法许可，否则未经同意，不得复制 BS EN 1175-3:1998 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1998 ? BSI 1998 ISBN 0580 29140 5 National foreword This British Standard is the English language version of EN 1175-3:1998. The UK participation in its preparation was entrusted to Technical Committee MHE/7, Industrial trucks, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled International Standards Correspondence Index, or by using the Find facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 10, an inside b