c1185-98a中文版-无石棉纤维水泥平面薄板、屋面板及墙面板和护墙板抽样和试验用标准试验方法.docVIP

C 1185 PAGE 802 Designation: C 1185 -98a编号：C1185-98a PAGE 782 Standard Test Methods forSampling and Testing Non-Asbestos Fiber-Cement FlatSheet, Roofing and Siding Shingles, and Clapboards1无石棉纤维水泥平面薄板、屋面板及墙面板和护墙板抽样和试验用标准试验方法 These test methods are under the jurisdiction of ASTM Committee C-17 on Fiber-Cement Products and are the direct responsibility of Subcommittee C17.02 on Non-Asbestos Fiber Cement Products.这些试验方法归ASTM负责纤维增强水泥制品的C-17委员会管辖，并由C17.02无石棉纤维水泥制品分委会直接负责。Current edition approved Aug. 10, 1998. Published November 1998. Originally published as C 1185 - 91. Last previous edition C 1185 - 98.现行版本于1998年8月10日批准，并于1998年11月出版。最初版本编号为C 1185-91，上一版本 This standard is issued under the fixed designation C 1185; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C1185刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示必威体育精装版重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 These test methods cover sampling and testing of non-asbestos fiber-cement flat sheets, roofing shingles, siding shingles, and clapboards. These products may be smooth or surface textured. These test methods are utilized in evaluating products cited in Specifications C 1186, C 1225, C 1288, and C1325.这些试验方法涵盖对无石棉纤维水泥平面薄板、屋面板及墙面板和护墙板所进行的取样和试验。这些制品可以是表面光滑的或带纹理的。这些试验方法应用于对规范C 1186、C 1288和C 1325中所征引的制品进行评估。 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro priate safety and health practices and determine the applica bility of regulatory limitations prior to use.本标准并非旨在解决所有与标准使用相关的安全问题（如有）。本标准使用者有责任确立适用的安全和健康规范并在使用前评估其是否符合有关条例。 The values stated in inch-pound units are to be regarded as the standard. The values given in par