RG 5.57-80 相关标准章节.docxVIP

Publication Date: 6/1/80  Pages: 10  Date Entered: 2/23/84  Title: SHIPPING AND RECEIVING CONTROL OF STRATEGIC SPECIAL NUCLEAR MATERIAL (6/76)  Revision 1  June 1980  U.S. NUCLEAR REGULATORY COMMISSION  REGULATORY GUIDE  OFFICE OF STANDARDS DEVELOPMENT  REGULATORY GUIDE 5.57  (Task SG 908-4) SHIPPING AND RECEIVING CONTROL OF STRATEGIC  SPECIAL NUCLEAR MATERIAL A. INTRODUCTION  Requirements for the physical protection of special nuclear material  (SNM) at licensee facilities and in transit and of plants in which SNM is  used are specified in 10 CFR Part 73, Physical Protection of Plants and  Materials, and are the subject of various regulatory guides issued or  under (*) development. Section 73.20 of 10 CFR Part 73 provides the  general performance objective and requirements for each licensee who is  authorized to operate a fuel reprocessing plant pursuant to 10 CFR Part  50, possesses or uses formula quantities of strategic special nuclear  material (SSNM) at any site or contiguous sites subject to control by the  licensee, is authorized to transport or deliver to a carrier for  transportation pursuant to 10 CFR Part 70 formula quantities of SSNM,  takes delivery of formula quantities of SSNM free on board (f.o.b.) the  point at which it is delivered to a carrier for transportation, or imports  or exports formula quantities of SSNM. Section 73.25 requires specific  performance capabilities for physical protection of SSNM in transit.  Section 73.45 requires specific performance capabilities for fixed site  physical protection systems. This guide is applicable to the shipping and  receiving control of SSNM subject to Sections 73.20, 73.25, and 73.45.  Other regulations are also pertinent to shipping and receiving  control. Section 70.58, Fundamental Nuclear Material Controls, requires  licensees to establish, maintain, and follow detailed fn