RG 5.12-73 相关标准章节.docxVIP

Publication Date: 11/1/73  Pages: 5  Date Entered: 2/22/84  Title: GENERAL USE OF LOCKS IN THE PROTECTION AND CONTROL OF FACILITIES AND SPECIAL NUCLEAR MATERIALS  November 1973  U.S. ATOMIC ENERGY COMMISSION  REGULATORY GUIDE  DIRECTORATE OF REGULATORY STANDARDS  REGULATORY GUIDE 5.12  GENERAL USE OF LOCKS IN THE PROTECTION AND CONTROL OF  FACILITIES AND SPECIAL NUCLEAR MATERIALS A. INTRODUCTION  Paragraph 50.34(c) of 10 CFR Part 50, Licensing of Production and  Utilization Facilities, requires each application for a license to  operate a production or utilization facility and paragraph 70.22(b) of  10 CFR Part 70, Special Nuclear Material, requires certain  applications for a license to possess or use special nuclear material  (SNM) to include a physical security plan to demonstrate how the  applicant plans to meet the physical protection requirements of 10 CFR  Part 73, Physical Protection of Plants and Materials. Paragraphs  50.54(p) and 70.32(e) require existing licensees licensed under Part 50  and certain licensees licensed under Part 70 who have not submitted a  physical security plan to submit such a plan to the Commission for  approval. Section 73.40 of 10 CFR Part 73 requires that certain  licensees provide physical protection against industrial sabotage and  afainst theft of SNM at the fixed sites where licensed activities are  conducted.  Locks are acceptable devices to be used in adhering to the  physical protection requirements identified above to assist in  controlling access to areas, facilities, and materials through doors,  gates, container lids, and similar material or personnel access points,  and are considered essential components of a physical barrier. This  guide provides criteria acceptable to the Regulatory Staff for the  selection and use of commercially available locks in the protection of  facilities and S