- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
BS 7371-3:2009
BSI British Standards
Coatings on metal fasteners –
Part 3: Specifications for electroplated
zinc coatings
NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
raising standards worldwide™
BS 7371-3:2009 BRITISH STANDARD
Publishing and copyright information
The BSI copyright notice displayed in this document indicates when the
document was last issued.
© BSI 2009
ISBN 978 0 580 55383 7
ICS 21.060.01, 25.220.40
The following BSI references relate to the work on this standard:
Committee reference FME/9
Draft for comment 08
Publication history
First published September 1993
Second edition August 2009
Amendments issued since publication
Date Text affected
BRITISH STANDARD BS 7371-3:2009
Contents
Foreword iii
Introduction 1
1 Scope 2
2 Normative references 2
3 Terms and definitions 3
您可能关注的文档
- AQ_1051-2008煤矿职业安全卫生个体防护用品配备标准.pdf
- BS_93-2008_尺寸为0B.A.至16B.A.的英国协会(B.A.)螺纹与公差规范.pdf
- BS_7371-1-2009_金属紧固件涂层.一般要求和选择指南规范.pdf
- BS_EN_755-1-2008_铝和铝合金.挤压短棒材棒材管材和型材.检验和交付技术状态.pdf
- BS_EN_755-7-2008_铝和铝合金.挤压的杆材棒材管材和型材.无缝管的尺寸和形状公差.pdf
- BS_EN_755-8-2008_铝和铝合金.挤压的杆材棒材管材和型材.出水孔管的尺寸和形状公差.pdf
- BS_EN_1559-2-2000交货技术条件铸钢件.pdf
- BS_EN_9131-2009_航空航天系列.质量管理体系.不符合要求的文件.pdf
- BS_EN_10025-4-2004__结构钢热轧制品.热机轧制的可焊接细粒结构钢的交货技术条件.pdf
- BS_EN_10025-6-2004__结构钢热轧制品.淬火和回火条件下高屈服强度结构钢板材和宽扁材的交货技术条件.pdf
文档评论(0)