毕业设计浮法玻璃电控系统.doc

摘要 洛阳理工学院毕业设计（论文） PAGE IV PAGE 4 3.5M浮法端切装机组纵切机组电气自动控制 摘 要 电气控制系统的设计主要包括原理设计与工艺设计两个方面。原理设计决定着生产机械设备的合理性与先进性，工艺设计决定电气控制系统是否具有生产可行性、经济性、美观、使用维修方便等特点，所以电气控制系统设计要全面考虑两方面的内容。 　玻璃行业的发展与国民经济的许多行业都存在着联系，玻璃行业对推动整个国民经济的发展都起着积极作用。因此“十一五”规划中也对玻璃产业的发展提出了具体要求。也颁布了各项法律法规来规范玻璃行业的健康发展。在新的形势下，玻璃工业必须按照科学发展观的要求，转变增长方式，有效调整产业结构，才能促进行业健康发展。 随着科技的发展，浮法玻璃逐渐取代了平板玻璃。纵切机是浮法玻璃生产过程中必不可缺的一种设备，因此而设计了浮法玻璃纵切机。 关键词：电气控制系统，浮法玻璃，纵切机 LONGITUDINAL END FLOAT 3.5M ELECTRIC CONTROL UNIT ABSTRACT Electrical control system design including design principles of design and technology aspects. Principles of design determines the production of machinery and equipment and the advanced nature of the reasonable, the decision process design of electrical control system with production feasibility, economic, aesthetic, easy to use features such as maintenance, the electrical control system design to take full account of the contents of both. lass industry and the national economy in many industries there is a link, the glass industry in promoting the development of national economy as a whole plays an active role. Therefore, Eleventh Five-Year Plan also on the development of glass industry specific requirements. Also enacted laws and regulations to regulate the healthy development of the glass industry. In the new situation, the glass industry must act in accordance with the requirements of the scientific concept of development, change the mode of growth, effectively adjust the industrial structure in order to promote KEY WORDS: Electrical Control System，Float Glass，Longitudinal plane 前言 目　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc232485136 前　言 PAGEREF _Toc232485136 \h 1 HYPERLINK \l _Toc232485137 第1章 浮法玻璃的发展 PAGEREF _Toc232485137 \h 2 HYPERLINK \l _Toc232485138 1.1 浮法玻璃的发展 PAGEREF _Toc232485138 \h 2 HYPERLINK \l _Toc232485139 1.1 浮法玻璃的前景 PAGEREF _Toc232485139 \h 3 HYPERLINK \l _Toc232485140 第2章 浮法玻璃切装机及纵切机的流程图 PAGEREF _Toc232485140 \h 5 HYPERLINK \l _Toc232485141 2.1 流程图 PAGEREF _Toc232485141 \h 5 HYP