沙特阿拉伯土壤和基础要求.docVIP

GENERAL Scope Design Definitions SITE INVESTIGATIONS General Scope Soil classification Investigation Soil boring and sampling Reports EXCAVATION, GRADING, AND FILL General Commencement Excavations near footings or foundations Slope limits Surcharge Placement of backfill Site grading Grading designation Grading and fill in floodways Compacted fill material Controlled low-strength material (CLSM) 1?总体总则 范围 设计 定义 现场调查 总则 范围 土壤分类研究 土壤钻孔取样报告 开挖、分级、充填 总则 开始 在地基或基础开挖边坡的极限 附加 位置回填 场地平整 指定平整 泄洪道的平整和填充 压实填土材料 控制性低强度材料(CLSM) ALLOWABLE LOAD-BEARING VALUES OF SOILS Design Presumptive load-bearing values Lateral sliding resistance Computed load-bearing values SPREAD FOOTINGS General Depth of footings Footings on or adjacent to slopes Design of footings Designs employing lateral bearing Seismic requirements FOUNDATION WALLS General Foundation wall thickness Foundation wall materials Alternative foundation wall reinforcement Hollow masonry walls Seismic requirements Foundation wall drainage Pier and curtain wall foundations Seismic requirements 土的容许承载力 设计 假定承载值横向抗滑计算承载值 5?扩展基础 总则 深基础 上或附近的斜坡地基基础设计 采用横向承重抗震要求的设计 基础墙 总则 基础墙厚丿艾 基础墙体材料 替代式基础墙配筋空心砌块墙体 基础墙排水抗震要求 墩及幕墙基础抗震要求 RETAINING WALLS General Lateral earth pressure Bearing capacity Stability Wall dimensions Wall construction COMBINED FOOTINGS AND MATS General Loadings Concrete Contact pressure Settlement Combined footings Continuous footings Grid foundations Mat foundations Seismic requirements DESIGN FOR EXPANSIVE SOILS General Loadings Design Pre-construction inspections Inspection prior to placement of concrete Concrete 挡土墙 总则 侧向土压力承载力稳定性 墙体尺寸和墙体建筑 联合基础和垫层 总则 载荷 混凝土 接触压力沉降联合基础条形基础网格基础垫地基抗震要求 基于膨胀土的设计 总则 载荷 设计 施工前的检查 混凝土浇筑前的检验 CHAPTER 10: DESIGN FOR COLLAPSIBLE SOILS 10」General Loadings Design Inspections Concrete CHAPTER 11: DESIGN FOR SABKHA SOILS General Loadings Design Required preventive measures Concrete Removal of sabkha soils Stabilization CHAPTER 12: DESIGN FOR VIBRATORY LOADS 12」General Loads and forces Soil bearing press