基于单片机的大棚温湿度控制系统设计（包含源代码）.docVIP

摘要 随着大棚技术的普及，温室大棚数量不断增多，对于蔬菜大棚来说，最重要的一个管理因素是温湿度控制。温湿度太低，蔬菜就会被冻死或则停止生长，所以要将温湿度始终控制在适合蔬菜生长的范围内。传统的温度控制是在温室大棚内部悬挂温度计，工人依据读取的温度值来调节大棚内的温度。如果仅靠人工控制既耗人力，又容易发生差错。现在，随着农业产业规模的提高，对于数量较多的大棚，传统的温度控制措施就显现出很大的局性。为此，在现代化的蔬菜大棚管理中通常有温湿度自动控制系统，以控制蔬菜大棚温度，适应生产需要。 本论文主要阐述了基于AT89C51单片机的温室大棚温湿度控制系统设计原理，主要电路设计及软件设计等。该系统采用AT89C51单片机作为控制器，SHT11作为温湿度数据采集系统，可对执行机构发出指令实现大棚温湿度参数调节，根据实际需求设计了单片机硬件系统，该系统能够实现数据采集，数据处理，数值显示，键盘扫描等功能功能。同时介绍了温湿度传感器，单片机接口，及其应用软件的设计，该基于单片机和SHT11温湿度传感器的大棚温湿度控制系统，该系统性能可靠，结构简单，能实现对温室内温湿度的自动调节。 关键词：AT89C51；SHT11；大棚；温湿度；控制系统；传感器；单片机 Abstract With the popularization of trellis technology, greenhouse trellis an ever-growing number, for vegetable shed speaking, one of the most important management factor is the temperature and humidity control. Temperature is too low, the vegetables will freeze to death or stop growing, so will always control temperature and humidity in a suitable vegetable growth range. Traditional temperature control is in greenhouse trellis internal hanging a thermometer, workers according to regulate the temperature reading the temperature inside the shelter. If only by artificial control both consumption manpower, and easy to place regular orders. Now, with the improvement of agricultural industry scale, for larger quantity of trellis, traditional temperature control measures will show great bureau sex. Therefore, in modern vegetable shed management zhongtong often temperature and humidity automatic control system, in order to control the temperature, adapt to the trellis vegetable production needs. This thesis mainly elaborated based on AT89C51 tomatoes canopy temperature and humidity control system design principle, main circuit design and software design, etc. This system USES AT89C51 single chip microcomputer as controller, SHT10 as temperature and humidity data acquisition system, may to the actuator directives realize trellis temperature and humidity parameters adjustment, has the upper and lower level computer directly set temperature r