【毕业论文】UG钻柄轧头设计论文.docVIP

常熟理工学院毕业设计（论文） PAGE \* MERGEFORMAT III 本科毕业设计（论文） 题目 钻柄轧头UG模型设计 学 院 化学与材料工程学院 年 级 2009级 专 业 材料科学与工程 班 级 1505091 学 号 150509124 学生姓名 指导教师 职 称 讲 师 论文提交日期 2013-05-22 钻柄轧头UG模型设计 摘 要 本文首简要介绍了UG的主要功能以及其五大应用模块。然后通过UG7.0软件对钻柄轧头进行模型设计。先绘制内外轮廓的草图，再创建回转曲面，并通过创建求差拉伸、镜像特征和绘制圆等操作对钻柄轧头创建卡槽；再通过边倒圆和倒斜角完成添加细节特征；最后完成钻柄轧头的实体建模并输出工程图。 通过对钻柄轧头的设计，了解了实体建模的操作流程，并具备一定的三维设计能力。 关键词：实体建模 UG 钻柄轧头 Drill Chuck Handle Model Design by UG Abstract The main functions and its five application modules of UG software were briefly introduced. And then the drill chuck handle model was designed by using UG7.0 software. The sketch of the internal and external contours was created first, and revolution surface was created secondly. The neck of the drill chuck handle was created by Subtract stretching, mirroring characteristics, draw a circle and so on. The detail features were added by edge blending and chamfering. Finally, the drill chuck handle was accomplished and the drawing was output . Through the course of the design of drill chuck hand, the experience of entity modeling and the abilities of three-dimensional design were got. Keywords: Solid modeling; UG; Drill chuck headle 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc356944231 1.前言 PAGEREF _Toc356944231 \h 1 HYPERLINK \l _Toc356944232 1.1 UG简介 PAGEREF _Toc356944232 \h 1 HYPERLINK \l _Toc356944233 1.2 UG主要功能 PAGEREF _Toc356944233 \h 1 HYPERLINK \l _Toc356944234 1.3UG的主要应用模块 PAGEREF _Toc356944234 \h 2 HYPERLINK \l _Toc356944235 1.4论文的主要研究任务 PAGEREF _Toc356944235 \h 5 HYPERLINK \l _Toc356944236 2.设计部分 PAGEREF _Toc356944236 \h 6 HYPERLINK \l _Toc356944237 2.1 新建文件 PAGEREF _Toc356944237 \h 6 HYPERLINK \l _Toc356944238 2.2 选择模块，设置草图选项 PAGEREF _Toc356944238 \h 6 HYPERLINK \l _Toc356944239 2.3 创建钻柄轧头的基体 PAGEREF _Toc356944239 \h 7 HYPERLINK \l _Toc356944240 2.4创建卡槽 PAGEREF _Toc356944240 \h 10 HYPERLINK \l _Toc356944241 2.