moldflow模流了解软件简介.pptVIP

Difficult to tell using traditional CAE tools Really need to inspect the defects on a physical prototype under lighting and surface finishes Autodesk Moldflow 2011How visible are the Sink Marks? Sink marks Shrink Warp CAD Model in Showcase Model enriched with Moldflow results Experience it before it is real !!! Autodesk Moldflow 2011Defect Visualization Autodesk Moldflow 2011Explore Alternatives – Surface Finish Autodesk Moldflow 2011Evaluate Alternatives – Texture can hide defects * There are four key design themes surrounding Autodesk Moldflow 2011: Time to solution, interoperability, accuracy, and innovation. * Let’s take a look at a demonstration of the Autodesk Moldflow Part Design functionality. This quick design check will highlight overly thin or thick areas of the part design, and check the model for compliance with standard design rules. The design check will verify part taper / draft angles, and the locations of undercuts that can cause part ejection issues. * * Autodesk Moldflow leverages the AIR Look interface and ribbon style. AIR Look provides ease of use and productivity improvements for our users. It modernizes the user interface and helps establish a common user experience with other Autodesk applications. On Autodesk Labs today, and in Autodesk Moldflow this Spring. * The Airlook elements used are the ribbon interface. (click 1). This includes areas that includes introductory videos, interactive tutorials and command lookup functionality to improve addoptation. Secondly (click 2), you see the view cube. Lastly, you have the interactive toolbar (click 3). * The analysis predictions can only be as good as the input that is provided. One of the most important inputs to an analysis is the plastic material data. The level of testing and the accuracy of the testing methods can greatly influence the analysis accuracy. The material database now includes information on the suitability of the material for filling, packing and warpage