- 1、本文档共40页,可阅读全部内容。
- 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
日产五千吨水泥磨系统工艺的设计
摘要
本设计的任务要求是日产5000吨水泥熟料系统水泥磨系统工艺设计。做这个设计的主要是我们在水泥厂里实习的车间是水泥磨,设计要求我们结合自己单位的实际,来设计一套水泥磨系统
本设计通过在自己单位的实际生产中遇到的问题和系统上一些不合理的工艺生产流程,将其问题进行解决和进行改进
本次设计一个年产160万吨普通硅酸盐水泥厂水泥粉磨车间。在这次设计中,以国内外先进的生产工艺和技术装备以及经验参数为基础,以节能降耗和保护环境为原则,并结合生产实际,采用了先进和合理的生产工艺流程及设备,同时进行了合理的全厂总平面布置和重点车间布置。
本次设计生产的水泥是PO42.5。
1)5000t/d熟料的水泥厂配料设计、物料平衡计算;
2)5000t/d熟料的水泥厂设备选型计算和主机生产能力平衡计算;
3)5000t/d熟料的水泥厂水泥磨系统工艺设计说明书的编制;
4)5000t/d熟料的水泥厂工艺流程图及水泥磨系统工艺布置图设计。
关键字:水泥磨系统工艺设计,全厂总平面布置,重点车间布置,物料平衡,PO42.5
Abstract The design of the task requirement is 5,000 tons daily production of cement clinker cement mill system process design system. Designed to do this mainly because we practice in the cement plant is in the cement mill, in conjunction with their unit design requires practical, to design a cement mill system
This design through actual production units in their own problems and systems in some reasonable production process technology, to improve problem solving and The design of an annual output of 1.60 million tons of cement grinding of ordinary portland cement plant. In this design, to advanced production technology and technical equipment and experience parameters as the basis for the energy saving and environmental protection principles, and actual production, and reasonable use of advanced production process and equipment, while for a reasonable whole plant general layout and key plant layout.Keywords: Portland cement, dry production process, Portland cement clinker, cement grinding, material balance
目录
总论 1
1.1我国水泥生产的现状 1
1.2 水泥粉磨系统 1
1.2.1 开流粉磨 1
1.2.2 闭路粉磨 1
1.3球磨机 2
第二章 配料计算 4
2.1 基条条件 4
2.2 配料计算 5
2.2.1计算湿原料的配合比 5
2.2.2原料消耗定额 5
2.2.3石膏和混合材的消耗定额 6
2.2.4烧成用煤消耗定额 7
2.2.5熟料及水泥消耗定额 7
2,2.6干原燃材料需要量计 8
2.2.7含天然水分原燃材料需要量计算 8
2.3 编制全厂物料平衡表 1
第三章 全厂工艺流程简介 1
3.1 全厂工艺流程 1
3.1.1水泥生产原料 1
3.2 水泥粉磨 3
第四章 水泥磨系统设备计算及选型 5
4.1 水泥磨机的选择 5
4.2 循环负荷、选粉效率及选粉设备 7
4.2.1循环负荷和选粉效率 7
4.3通风及除尘系统 9
4.3.1通风及除尘的作用 9
4.3.2 除尘系统的计算 10
4.3.3 袋式除尘器的选型 11
4.4 除尘风管直径及管道阻力计算 13
4.4.1除尘风管直径计算 13
4.4.2管网的局部阻力计算 15
4.4.3风机选型 16
4.
文档评论(0)